Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHRYSLER2008TOWN & COUNTRY V6-3.8LREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSPOWER WINDOW SWITCHLOCATIONSSWITCH-WINDOW/DOOR LOCK-DRIVER
2008 Chrysler Town & Country V6-3.8L
Switch-Window/Door Lock-Driver
2008 Chrysler Town & Country V6-3.8LSECTION Switch-Window/Door Lock-Driver
Component ID: 520
Component : SWITCH-WINDOW/DOOR LOCK-DRIVER
Connector:
Name : SWITCH-WINDOW/DOOR LOCK-DRIVER C1
Color :
# of pins : 10
Pin Circuit Description
1 P74 20TN/OR PASSENGER MIRROR HORIZONTAL DRIVER
Pin Circuit Description
1 A855 20DG/RD FUSED B(+)
2 P71 20TN/DG DRIVER MIRROR VERTICAL DRIVER
2 Q911 20OR/GY DRIVER WINDOW SWITCH SENSE RETURN
2 Q911 22OR/GY DRIVER WINDOW SWITCH SENSE RETURN
3 G161 20VT/DG DRIVER DOOR LOCK SWITCH MUX
3 D903 22LG/LB LIN BUS
3 D903 20LG/LB LIN BUS
4 P37 20LG/TN SWITCH RETURN
5 - -
6 P72 20TN/GY PASSENGER MIRROR VERTICAL DRIVER
6 D903 20LG/LB LIN BUS
7 P70 20TN/LB DRIVER/PASSENGER MIRROR COMMON DRIVER
8 P75 20TN/LG DRIVER MIRROR HORIZONTAL DRIVER
9 A855 20DG/RD FUSED B(+)
10 - -
Component Location - 61
Connector:
Name : SWITCH-WINDOW/DOOR LOCK-DRIVER C2
Color :
# of pins : 14
Pin Circuit Description
1 F30 14PK/YL FUSED IGNITION SWITCH OUTPUT
2 Q411 14OR/WT MASTER WINDOW SWITCH LEFT REAR (UP)
3 Q611 14OR/GY MASTER WINDOW SWITCH LEFT REAR (DOWN)
4 Q15 14OR/LB WINDOW LOCK OUT SWITCH OUTPUT
5 Z908 14BK GROUND
6 Q412 14OR/LB MASTER WINDOW SWITCH RIGHT REAR (UP)
7 Q612 14OR/DB MASTER WINDOW SWITCH RIGHT REAR (DOWN)
8 F30 14PK/YL FUSED IGNITION SWITCH OUTPUT
9 Q21 14OR/WT DRIVER WINDOW DRIVER (DOWN)
10 Q11 14OR/LG DRIVER WINDOW DRIVER (UP)
11 - -
12 Q16 14OR/TN MASTER WINDOW SWITCH PASSENGER (UP)
13 Z908 14BK GROUND
14 Q26 14OR/GY MASTER WINDOW SWITCH PASSENGER (DOWN)
Component Location - 61
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.