Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Chrysler: 2008
2008 ChryslerSECTION 2008
- 300
- 300 SRT-8 V8-6.1L
- Aspen 2WD
- Aspen 4WD
- Crossfire V6-3.2L
- PT Cruiser
- Pacifica
- Sebring Convertible
- Sebring Sedan
- Town & Country
- 300
- Aspen
- Crossfire
- PT Cruiser
- Pacifica
- Sebring
- Base, 2D Convertible, 2.4 J
- Base, 2D Convertible, 2.4 K
- Base, 4D Sedan, 2.4 J
- Base, 4D Sedan, 2.4 K
- Base, 4D Sedan, 2.7 R, Gas
- Base, 4D Sedan, 2.7 R, Gas/Ethanol
- LX, 2D Convertible, 2.4 J
- LX, 2D Convertible, 2.4 K
- LX, 4D Sedan, 2.4 J
- LX, 4D Sedan, 2.4 K
- LX, 4D Sedan, 2.7 R, Gas
- LX, 4D Sedan, 2.7 R, Gas/Ethanol
- Limited, 2D Convertible
- Limited, 4D Sedan, 2.4 J
- Limited, 4D Sedan, 2.4 K
- Limited, 4D Sedan, 3.5 M, AWD
- Limited, 4D Sedan, 3.5 M, FWD
- Touring, 2D Convertible, Gas
- Touring, 2D Convertible, Gas/Ethanol
- Touring, 4D Sedan, 2.4 J
- Touring, 4D Sedan, 2.4 K
- Touring, 4D Sedan, 2.7 R, Gas
- Touring, 4D Sedan, 2.7 R, Gas/Ethanol
- Town & Country
Database: CHARM
CHARM manuals were retrieved from a set of DVDs released in late 2013. These manuals are usually the most detailed for the years in which they're available, but occasionally have missing or cut-off images.
Database: LEMON
LEMON manuals were retrieved in late 2025, so they have more up to date technical bulletins for example. However, they tend to be less detailed for older vehicles.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.