Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2008TOWN & COUNTRY V6-3.8LREPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSAIR BAG CONTROL MODULEMODULE-OCCUPANT RESTRAINT CONTROLLER C1-A
2008 Chrysler Town & Country V6-3.8L
Module-Occupant Restraint Controller C1-A
2008 Chrysler Town & Country V6-3.8LSECTION Module-Occupant Restraint Controller C1-A
Component ID: 374
Component : MODULE-OCCUPANT RESTRAINT CONTROLLER C1-A
Connector:
Name : MODULE-OCCUPANT RESTRAINT CONTROLLER C1-A
Color :
# of pins : 36
Pin Circuit Description
1 R81 20LB/WT LEFT FRONT IMPACT SENSOR GROUND
2 R82 20WT/LB RIGHT FRONT IMPACT SENSOR GROUND
3 R20 20WT/LG RIGHT SIDE IMPACT SENSOR 2 GROUND
4 R19 20LG/WT LEFT SIDE IMPACT SENSOR 2 GROUND
5 - -
6 - -
7 R58 20LB/GY PASSENGER SEAT BELT SWITCH SENSE
8 R15 20LG/BR LEFT SIDE IMPACT SENSOR 1 GROUND
9 R16 20BR/LG RIGHT SIDE IMPACT SENSOR 1 GROUND
10 R24 20YL/LB RIGHT SIDE IMPACT SENSOR 3 GROUND
11 R23 20LB/YL LEFT SIDE IMPACT SENSOR 3 GROUND
12 - -
13 R264 20VT/LB PASSENGER SEAT TRACK POSITION SENSOR SUPPLY
14 - -
15 R60 20LB/TN PASSENGER SEAT BELT SWITCH RETURN
16 R261 20LB/WT DRIVER SEAT POSITION SENSOR DATA
17 - -
18 R262 20WT/LB PASSENGER SEAT TRACK POSITION SENSOR SIGNAL
19 R79 20LB/VT LEFT FRONT IMPACT SENSOR SIGNAL
20 R80 20VT/LB RIGHT FRONT IMPACT SENSOR SIGNAL
21 R18 20LB RIGHT SIDE IMPACT SENSOR 2 SIGNAL
22 R17 20LG LEFT SIDE IMPACT SENSOR 2 SIGNAL
23 - -
24 - -
25 - -
26 R13 20LG/TN LEFT SIDE IMPACT SENSOR 1 SIGNAL
27 R14 20TN/LG RIGHT SIDE IMPACT SENSOR 1 SIGNAL
28 R22 20WT/LB RIGHT SIDE IMPACT SENSOR 3 SIGNAL
29 R21 20LB/WT LEFT SIDE IMPACT SENSOR 3 SIGNAL
30 R263 20LB/VT DRIVER SEAT POSITION SENSOR VOLTAGE
31 - -
32 - -
33 - -
34 - -
35 - -
36 - -
Component Location - 55
Component Location - 59
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.