SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1993LEBARON LANDAUREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM - BENDIX-6CONNECTOR IDENTIFICATION
1993 Chrysler LeBaron Landau

Connector Identification

1993 Chrysler LeBaron LandauSECTION Connector Identification
CONNECTOR IDENTIFICATION DIRECTORY

Connector Figure:
ABS Modulator Assembly See Fig 1
ABS Pump/Motor Relay See Fig 2
ABS System Relay See Fig 3
Anti-Lock Light Relay See Fig 4
Controller Anti-Lock Brake (CAB) See Fig 5
CCD Data Link See Fig 6
Wheel Speed Sensors See Fig 7
Fig 1: ABS Modulator Assembly Connector Terminal ID
G92H03549Courtesy of CHRYSLER CORP.
MODULATOR ASSEMBLY CONNECTOR

Terminal Wire Color Function
1 Black Primary Ground
2 Brown/Light Blue RR Build/Decay Valve
3 White/Dark Green LF/RR Isolation Valve
4 Dark Green/Light Blue LR Build/Decay Valve
5 Black Secondary Ground
6 Brown/White Pump/Motor Ground
7 Brown/Yellow LF Build/Decay Valve
8 White/Light Green RF/LR Isolation Valve
9 Dark Green/Yellow RF Build Decay Valve
10 Black Pump Motor Monitor (+)
Fig 2: ABS Pump/Motor Relay Connector Terminal ID
G92J03550Courtesy of CHRYSLER CORP.
ABS PUMP/MOTOR RELAY CONNECTOR

Terminal Wire Color Function
A Red/Light Blue System Relay Voltage
B Red/Dark Green Battery 12V
C Gray Pump/Motor Ground (CAB Controlled)
D Brown/White Pump/Motor & CAB Motor Monitor
Fig 3: Identifying ABS System Relay Connector Terminals
G92B03551Courtesy of CHRYSLER CORP.
ABS SYSTEM RELAY CONNECTOR

Terminal Wire Color Function
A Brown/Black System Relay Actuation
B Red/Dark Green Battery 12V
C Black Ground
D Red/Light Blue System Relay Voltage
E Not Used Not Used
Fig 4: Anti-Lock Light Relay Connector Terminal ID
G92D03552Courtesy of CHRYSLER CORP.
ANTI-LOCK WARNING LAMP RELAY CONNECTOR

Terminal Wire Color Function
A Red/Light Blue System Relay Voltage
B Light Green/Orange CAB Anti-Lock Warning Light Anti-Lock Warning Light Bulb (Double Crimped At Relay Terminal)
C Black Ground
D Not Used Not Used
E Black Ground
Fig 5: CAB 60-Pin Connector Terminal ID
G92F03553Courtesy of CHRYSLER CORP.
CAB 60-PIN CONNECTOR

Terminal Wire Color Function
1 Yellow/Dark Blue RR Wheel Sensor (-)
2 Yellow RR Wheel Sensor (+)
3 (1) Light Green/Dark Blue LR Wheel Sensor (-)
4 Light Green LR Wheel Sensor (+)
5 Black Ground
6 (2) White/Dark Blue RF Wheel Sensor (-)
7 White RF Wheel Sensor (+)
8 (3) Red/Dark Blue LF Wheel Sensor (-)
9 Red LF Wheel Sensor (+)
10 Not Used Not Used
11 (4) White/Violet Diagnostic (Data Input)
12 Orange Diagnostic (Data Output)
13 White/Tan Brakelight Switch
14 Not Used Not Used
15 Light Green/Orange ANTI-LOCK Light
16 Gray Pump/Motor Relay (-)
17-19 Not Used Not Used
20 Brown/White Pump Motor Monitor
21-40 Not Used Not Used
41 Red/Light Blue Solenoid (+) 12V
42 Brown/Yellow LF Build/Decay Valve
43 Dark Green/Yellow RF Build/Decay Valve
44 Not Used Not Used
45 White/Dark Green LF/RR Isolation Valve
46 Brown/Light Blue LR Build/Decay Valve
47 Red/Light Blue Solenoid Feed (+) 12V
48 Dark Green/Light Blue RR Build/Decay Valve
49 White/Light Green RF/LR Isolation Valve
50-56 Not Used Not Used
57 Brown/Black System Relay (+)
58-59 Not Used Not Used
60 (5) Dark Blue Ignition (+) 12V
(1) Light Green/Black wire on AP body.
(2) White/Black wire on AP body.
(3) Red/White wire on AP body.
(4) White/Dark Blue wire on AP body.
(5) Dark Blue/White wire on AG and AJ bodies.
Fig 6: CCD Data Link Connector Terminal ID
G92H03554Courtesy of CHRYSLER CORP.
CCD DATA LINK CONNECTOR

Terminal Wire Color Function
1 White/Violet Data In
2 Red Battery 12V
3 White/Black Serial Data Bus (-)
4 Violet/Brown Serial Data Bus (+)
5 Orange Data Out
6 Black/Light Green Ground
Fig 7: Wheel Speed Sensor Connector Terminal ID
G92A03555Courtesy of CHRYSLER CORP.
RR WHEEL SPEED SENSOR CONNECTOR

Terminal (1) Wire Color Function
1 (2) Yellow/Dark Blue RR Sensor (-)
2 Yellow RR Sensor (+)
(1) Terminal number identifies female connector.
(2) Yellow/Black wire on AP models.
LR WHEEL SPEED SENSOR CONNECTOR

Terminal (1) Wire Color Function
1 (2) Light Green/Dark Blue LR Sensor (-)
2 Light Green LR Sensor (+)
(1) Terminal number identifies female connector.
(2) Light Green/Black wire on AP models.
RF WHEEL SPEED SENSOR CONNECTOR

Terminal (1) Wire Color Function
1 White RF Sensor (+)
2 (2) White/Dark Blue RF Sensor (-)
(1) Terminal number identifies female connector.
(2) White/Black wire on AP models.
LF WHEEL SPEED SENSOR CONNECTOR

Terminal (1) Wire Color Function
1 (2) Red/Dark Blue LF Sensor (-)
2 Red LF Sensor (+)
(1) Terminal number identifies female connector.
(2) Red/White wire on AP models.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.