Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1993LEBARON LANDAUREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM - BENDIX-4REMOVAL & INSTALLATIONMODULATOR ASSEMBLYINSTALLATION
1993 Chrysler LeBaron Landau
Modulator Assembly: Installation
1993 Chrysler LeBaron LandauSECTION Installation
- Check 3 modulator assembly bushings and replace if necessary. See Fig 1 . Install modulator assembly on mounting bracket. Ensure bushings are properly aligned on mounting bracket and modulator assembly. Install, but DO NOT tighten, modulator assembly-to-bracket bolt. Raise vehicle on hoist. Install and tighten both lower mounting bracket bolts to 21 ft. lbs. (28 N.m).
- Install 6 hydraulic brake tubes to modulator assembly, and tighten fittings to 13 ft. lbs. (18 N.m). Reconnect 10-pin modulator assembly connector. Lower vehicle, and install 2 master cylinder supply tubes to modulator assembly. Tighten modulator assembly and master cylinder fittings to 12 ft. lbs. (16 N.m). Tighten modulator-to-bracket upper bolt to 21 ft. lbs. (28 N.m).
- Bleed brake system. See BLEEDING BRAKE SYSTEM . Install acid shield and battery tray. Install battery, and connect battery cables.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.