Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1993LEBARON LANDAUREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM - BENDIX-4DIAGNOSIS & TESTINGDRB-II TEST FUNCTIONSCONFIGURE MODE
1993 Chrysler LeBaron Landau
CONFIGURE Mode
1993 Chrysler LeBaron LandauSECTION CONFIGURE Mode
- This mode allows user to customize DRB-II display. For example, if metric system is more useful, simply select METRIC from appropriate menu. All selections made under CONFIGURE mode will remain active until user changes selection.
- Enter DRB-II main menu to access CONFIGURE mode. See ENTERING DRB-II MAIN MENU under DRB-II TEST FUNCTIONS . At DRB-II main menu, press "3" (CONFIGURE) key. Press ENTER key. DRB-II will display CONFIGURE menu.
NOTE:
Because DRB-II is grounded through diagnostic connector, only one volt/ohmmeter test lead is required when using volt/ohmmeter mode. DRB-II volt/ohmmeter should only be used when required by self-diagnostic tests.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.