Driver or Passenger Seat Adjuster Memory Module Replacement

2020 Chevrolet Tahoe FL, RWD, Gas/EthanolSECTION Driver or Passenger Seat Adjuster Memory Module Replacement
GM3944203Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the front seat adjuster memory module bracket. Refer to Front Seat Adjuster Memory Module Bracket Replacement .
1 Driver or Passenger Seat Adjuster Memory Module Fastener
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Driver or Passenger Seat Adjuster Memory Module

Procedure

  1. Disconnect electrical connectors.
  2. Remove the module from the driver seat bracket.
  3. Refer to Control Module References for programing and setup information.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.