SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 6 (ENGINE COOLING SYSTEM)REPAIR INSTRUCTIONSRADIATOR REPLACEMENT (2H0)
2019 Chevrolet Trax Premier, AWD

Radiator Replacement (2H0)

2019 Chevrolet Trax Premier, AWDSECTION Radiator Replacement (2H0)
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
GM2809975
Callout Component Name

Preliminary Procedures

  1. Remove the air conditioning condenser. Refer to Air Conditioning Condenser Replacement (LUV)Air Conditioning Condenser Replacement (LE2) .
  2. Disconnect the radiator inlet and outlet hoses from the radiator assembly. Refer to Radiator Inlet Hose Replacement (LUV) Radiator Inlet Hose Replacement (2HO) Radiator Inlet Hose Replacement (LE2) , and Radiator Outlet Hose Replacement (LUV) Radiator Outlet Hose Replacement (2H0) Radiator Outlet Hose Replacement (LE2) .
  3. Remove the transmission fluid auxiliary cooler and the transmission fluid cooler inlet pipe from the radiator if equipped. Refer to Transmission Fluid Auxiliary Cooler Replacement (2H0)Transmission Fluid Auxiliary Cooler Replacement (LE2, LUV) , and Transmission Fluid Cooler Inlet Pipe Replacement (2HO) .
  4. Remove the radiator upper brackets. Refer to Radiator Upper Bracket Replacement (2H0) Radiator Upper Bracket Replacement (LUV) Radiator Upper Bracket Replacement (LE2) .
1 Radiator
Procedure 
Unclip the engine coolant fan shroud from the radiator.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.