SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 6 (ENGINE COOLING SYSTEM)REPAIR INSTRUCTIONSRADIATOR INLET HOSE REPLACEMENT (LUV)
2019 Chevrolet Trax Premier, AWD

Radiator Inlet Hose Replacement (LUV)

2019 Chevrolet Trax Premier, AWDSECTION Radiator Inlet Hose Replacement (LUV)
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
GM2791496
Callout Component Name

Preliminary Procedures

  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Remove the radiator surge tank, and reposition the radiator surge tank out of the way. Refer to Radiator Surge Tank Replacement (LUV, 2H0) Radiator Surge Tank Replacement (LE2) .
  3. Disconnect the electrical connectors.
1 Radiator Inlet Hose Clamp (Qty: 2)
Special Tools 
BO-38185  Hose Clamp Pliers.
For equivalent regional tools, refer to Special Tools .
2 Radiator Inlet Hose
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.