Rear Window Washer Nozzle Replacement (Chevrolet)

2019 Chevrolet Trax Premier, AWDSECTION Rear Window Washer Nozzle Replacement (Chevrolet)
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
GM2844454
Callout Component Name

Preliminary Procedures

  1. Open and support the liftgate.
  2. Remove the rear end spoiler. Refer to Rear End Spoiler Replacement .
1 Rear Window Washer Nozzle

Procedure

  1. Disconnect the rear window washer hose from the rear window washer nozzle.
  2. Pinch the two tabs (arrows) on the rear window washer nozzle and push the nozzle out of the rear end spoiler.
  3. Remove the rear window washer nozzle from the rear end spoiler.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.