Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2015EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN BREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL AND STEERING COLUMNREPAIR INSTRUCTIONSTURN SIGNAL MULTIFUNCTION SWITCH REPLACEMENTREMOVAL PROCEDURE
2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN B
Removal Procedure
2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN BSECTION Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling .
- Remove the steering wheel. Refer to Steering Wheel Replacement .
- Remove the upper and lower trim covers. Refer to Steering Column Trim Cover Replacement .
- Disconnect the turn signal and multifunction switch assembly connector.
- Remove the 2 screws (1) from the turn signal and multifunction switch assembly (2).
- Remove the turn signal and multifunction switch assembly from the steering column tilt head assembly.
WARNING:
Refer to SIR Warning .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.