Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2015EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN BREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTSTEERING COLUMN SWITCHESSTEERING WHEEL AND STEERING COLUMNREPAIR INSTRUCTIONSTURN SIGNAL MULTIFUNCTION SWITCH REPLACEMENTREMOVAL PROCEDURE
2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN B
Removal Procedure
2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN BSECTION Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling .
- Remove the steering wheel. Refer to Steering Wheel Replacement .
- Remove the upper and lower trim covers. Refer to Steering Column Trim Cover Replacement .
- Disconnect the turn signal and multifunction switch assembly connector.
- Remove the 2 screws (1) from the turn signal and multifunction switch assembly (2).
- Remove the turn signal and multifunction switch assembly from the steering column tilt head assembly.
WARNING:
Refer to SIR Warning .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.