SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2015CAPTIVA SPORT LTZREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSSUPPLEMENTAL INFLATABLE RESTRAINT SYSTEMREPAIR INSTRUCTIONSAIRBAG VEHICLE ROLLOVER SENSOR REPLACEMENT
2015 Chevrolet Captiva Sport LTZ

Airbag Vehicle Rollover Sensor Replacement

2015 Chevrolet Captiva Sport LTZSECTION Airbag Vehicle Rollover Sensor Replacement
Fig 1: Airbag Vehicle Rollover Sensor
GM1837210Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

Refer to SIR Warning .

Preliminary Procedures

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the front floor console. Refer to Front Floor Console Replacement .
  3. Remove the center floor air outlet duct. Refer to Floor Air Outlet Replacement - Center .
1 Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (88 lb ft)
2 Inflatable Restraint Vehicle Rollover Sensor Assembly

Procedure

  1. Position the carpet in order to access the sensor.
  2. Disconnect the electrical connectors.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.