Front Floor Console Replacement

2015 Chevrolet Captiva Sport LTZSECTION Front Floor Console Replacement
Fig 1: Front Floor Console
GM2410370Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the front seats. Refer to Front Seat Removal and Installation - Bucket .
  2. Slide the front floor console cupholder to the full rearward position.
  3. Remove the front floor console compartment liner.
1 Front Floor Console Lower Fasteners (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
8 N.m (71 lb in)
2 Front Floor Console Inner Fasteners (Qty: 4)
Tighten 
8 N.m (71 lb in)
3 Front Floor Console Assembly

Procedure

  1. Disconnect the electrical connections.
  2. When replacing the front floor console, transfer all necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.