SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014CAMARO ZL1, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSFIXED AND MOVEABLE WINDOW SYSTEMREPAIR INSTRUCTIONSWINDSHIELD REPLACEMENTINSTALLATION PROCEDURE
2014 Chevrolet Camaro ZL1, 2D Convertible, Standard Trans

Installation Procedure

2014 Chevrolet Camaro ZL1, 2D Convertible, Standard TransSECTION Installation Procedure
  1. Install a stationary window into the opening. Refer to Adhesive Installation of Windshields .
  2. Install the remote control door receiver antenna. Refer to Remote Control Door Lock Receiver Replacement (With BTV)Remote Control Door Lock Receiver Replacement (Without BTV) .
  3. Install the inside rearview mirror. Refer to Inside Rearview Mirror Replacement .
  4. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  5. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (V6)Windshield Wiper Arm Replacement (V8) .
  6. Close the hood.
  7. Remove the double layer of masking tape from around the perimeter of the painted surfaces and the interior trim.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.