SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009HHR LT, 2.4 V, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL UPPER TRIM PAD REPLACEMENT
2009 Chevrolet HHR LT, 2.4 V, Standard

Instrument Panel Upper Trim Pad Replacement

2009 Chevrolet HHR LT, 2.4 V, StandardSECTION Instrument Panel Upper Trim Pad Replacement
Fig 1: View Of Instrument Panel Upper Trim Pad
GM1608409Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement .
  2. Remove the instrument panel cluster bezel trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  3. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  4. Remove the instrument panel center compartment. Refer to Instrument Panel Center Compartment Replacement .
  5. Remove the instrument panel inflatable restraint. Refer to Instrument Panel Inflatable Restraint Module Replacement .
1 Instrument Panel Upper Trim Pad Screw (Qty: 5)
CAUTION: Refer to Fastener Caution .

Tighten:  2 N.m (18 lb in)
2 Instrument Panel Upper Trim Pad Assembly
Tip:  Disconnect the electrical connectors.
3 Retainer Clip (Qty: 14)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.