Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2009HHR LT, 2.4 V, STANDARDREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL ACCESSORY TRIM PLATE REPLACEMENT

2009 Chevrolet HHR LT, 2.4 V, Standard

Instrument Panel Accessory Trim Plate Replacement

2009 Chevrolet HHR LT, 2.4 V, StandardSECTION Instrument Panel Accessory Trim Plate Replacement

Fig 1: View Of Instrument Panel Accessory Trim Plate

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedure:
Remove the front floor console. Refer to Front Floor Console Replacement .

Instrument Panel Accessory Trim Plate Assembly

Procedure

Use a plastic trim tool in order to release the retainer securing the instrument panel accessory trim plate to the instrument panel assembly.
Disconnect the electrical connectors.
When replacing the instrument panel accessory trim panel, transfer all necessary components.

Retainer Clips (Qty: 8)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.