Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2008HHR LT, 2.4 P, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 161 (MAINTENANCE)MAINTENANCE MINDERGENERAL INFORMATIONSERVICE INFORMATION

2008 Chevrolet HHR LT, 2.4 P, Automatic

Service Information

2008 Chevrolet HHR LT, 2.4 P, AutomaticSECTION Service Information

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

The remaining engine oil life (A) is shown as a percentage in the multi-information display. To see the current engine oil life, turn the ignition switch to ON (II), then push and release the SEL/RESET button repeatedly until the engine oil life displays.

Fig 1: Screen Display - Engine Oil Life
Courtesy of AMERICAN HONDA MOTOR CO., INC.
When the ignition switch is ON (II) and the remaining engine oil life is 15 % to 6 %, the remaining engine oil life and other scheduled maintenance item(s) needing service are displayed.
The maintenance system message "SERVICE DUE SOON" (A) also comes on. To cancel the message, press the INFO button. The display continues to show the remaining engine oil life (B) and the message indicator (C) until it is reset.
- Complete list of maintenance main items (D) (see MAINTENANCE MAIN ITEMS ).
- Complete list of maintenance sub items (E) (see MAINTENANCE SUB ITEMS ).
Fig 2: Screen Display - Service Due Soon
Courtesy of AMERICAN HONDA MOTOR CO., INC.
When the ignition switch is ON (II) and the remaining engine oil life is 5 % to 1 %, the maintenance system message "SERVICE DUE NOW" is displayed along with the same maintenance item code(s). If the maintenance system message display is canceled, a "SERVICE" message appears.

Fig 3: Screen Display - Service Due Now
Courtesy of AMERICAN HONDA MOTOR CO., INC.
When the ignition switch is ON (II) and the remaining engine oil life is 0 %, the maintenance system message "SERVICE PAST DUE" is displayed along with the same maintenance item code(s).

Fig 4: Screen Display - Service Past Due
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the indicated maintenance is not done, the "SERVICE PAST DUE" message shows a negative mileage, for example "10," on the display. If the negative mileage is between 0 and 9, the message is displayed for only a few seconds when the ignition switch is turned to ON (II). The negative mileage (A) remains displayed after the vehicle is driven more than 10 miles (for USA models) or 10 km (for Canada models) after 0 % oil life is reached, and the display cannot be canceled. This means the indicated maintenance item(s) should have been done more than 10 miles (or 10 km) ago.

Fig 5: Screen Display - Service Past Due
Courtesy of AMERICAN HONDA MOTOR CO., INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.