Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL & STEERING COLUMNSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Fastener Tightening Specifications
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Ignition Lock Cylinder Solenoid Screw | 2 N.m | 18 lb in |
| Ignition Switch Screws | 2 N.m | 18 lb in |
| Intermediate Shaft Pinch Bolt | 34 N.m | 25 lb ft |
| Ignition Lock Cylinder Case Shear Bolt | 20 N.m | 15 lb ft |
| Steering Column Mid Pivot Bolt | 25 N.m | 18 lb ft |
| Steering Column Mounting Bolt | 25 N.m | 18 lb ft |
| Steering Column Trim Cover Screws | 2 N.m | 18 lb in |
| Steering Column Upper Jacket Bolt | 11 N.m | 97 lb in |
| Steering Wheel Control Switch | 1.8 N.m | 16 lb in |
| Steering Wheel Horn Switch Bolts | 7 N.m | 62 lb in |
| Steering Wheel Nut | 41 N.m | 31 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.