Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 761 (ABS COMPONENTS)SYSTEM DESCRIPTIONABS MODULATOR-CONTROL UNIT INPUTS AND OUTPUTS FOR 47P CONNECTOR
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
ABS Modulator-Control Unit Inputs and Outputs for 47P Connector
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION ABS Modulator-Control Unit Inputs and Outputs for 47P Connector
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
WIRE COLOR REFERENCE
| Terminal number | Wire color | Terminal sign | Description | Signal |
|---|---|---|---|---|
| 1 | GRN | MR+B | Power source for the motor relay | Battery voltage (about 12 V) at all times |
| 8 | PUR | IG1 | Power source for activating the system | With ignition switch ON (II): battery voltage (about 12 V) |
| 10 | RED | K-LINE | Communication with HDS | - |
| 12 | WHT | CANH | F-CAN communication circuit | |
| 13 | RED | CANL | F-CAN communication circuit | |
| 16 | BLK | GND | Ground for the ABS modulator-control unit | Continuity to ground |
| 32 | WHT | FSR+B | Power source for the fail-safe relay | Battery voltage (about 12 V) at all times |
| 33 | BLU | FR-GND | Detects right-front wheel sensor signal | - |
| 34 | YEL | FR+B | Detects right-front wheel sensor signal | |
| 36 | PNK | RL+B | Detects left-rear wheel sensor signal | - |
| 37 | GRY | RL-GND | Detects left-rear wheel sensor signal | |
| 42 | WHT | RR-GND | Detects right-rear wheel sensor signal | |
| 43 | GRN | RR+B | Detects right-rear wheel sensor signal | |
| 45 | LT GRN | FL+B | Detects left-front wheel sensor signal | |
| 46 | BRN | FL-GND | Detects left-front wheel sensor signal | |
| 47 | BLK | MR-GND | Ground for the pump motor | Continuity to ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.