SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 530 (SEAT HEATING SYSTEM & SEAT COOLING SYSTEM)COMPONENT LOCATORHEATED/COOLED SEAT CONNECTORSHEATED SEAT CONTROL MODULE, C2 (KA1)
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Heated Seat Control Module, C2 (KA1)

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Heated Seat Control Module, C2 (KA1)
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Seat Control Module, C2 (KA1) Connector End Views
GM1653389Courtesy of GENERAL MOTORS CORP.
Heated Seat Control Module, C2 (KA1) Connector Parts Information

Connector Part Information 
  • OEM: 15491286
  • Service: 88988652
  • Description: 8-Way F Receptacle 2.8 (BK)
Terminal Part Information 
  • Pins: 1, 2
  • Terminal/Tray: 8100-4444/22
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: 6, 8
  • Terminal/Tray: 8100-4443/22
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Heated Seat Control Module, C2 (KA1) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 RD/WH 1440 Battery Positive Voltage
2 BK 550 Ground
3-5 - - Not Used
6 YE 2080 Driver Heated Seat Cushion Temperature Sensor Low Reference
7 - - Not Used
8 PK 2435 Passenger Heated Seat Cushion Temperature Sensor Low Reference
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.