Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.3 T, 4L60E/M30REPAIR AND DIAGNOSISELECTRICALINSTRUMENT PANEL SYSTEM DISPLAYS, GAUGES AND CONSOLEDESCRIPTION AND OPERATIONINDICATOR/WARNING MESSAGE DESCRIPTION AND OPERATIONNOTES
2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30
Indicator/Warning Message Description and Operation: Notes
2006 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.3 T, 4L60E/M30SECTION Notes
Indicators
| Symbol | Description |
|---|---|
| ABS: Refer to ABS Description and Operation (W/JL4) or ABS Description and Operation (W/O JL4) | |
| Air Bag: Refer to SIR System Description and Operation | |
|
BRAKE |
Brake: Refer to Brake Warning System Description and Operation |
| Change Engine Oil/Low Oil Level: Refer to Indicator/Warning Message Description and Operation | |
| Charge: Refer to Charging System Description and Operation | |
|
CHECK GAGES |
Check Gages: Refer to Indicator/Warning Message Description and Operation |
| DRL: Refer to Exterior Lighting Systems Description and Operation | |
| Fasten Passenger Seat Belts: Refer to Seat Belt System Description and Operation | |
| Fasten Safety Belt: Refer to Seat Belt System Description and Operation | |
| High Beam: Refer to Exterior Lighting Systems Description and Operation | |
| Low Fuel: Refer to Indicator/Warning Message Description and Operation | |
|
CHECK |
Malfunction Indicator Lamp:
|
| Passenger Air Bag Off: Refer to SIR System Description and Operation | |
| Passenger Air Bag On: Refer to SIR System Description and Operation | |
|
SECURITY |
Security: Refer to Theft Systems Description and Operation |
|
STABILITY CAUTION |
Stability Caution: Refer to ABS Description and Operation (W/JL4) or ABS Description and Operation (W/O JL4) |
|
STABILITY NOT READY |
Stability Not Ready: Refer to ABS Description and Operation (W/JL4) or ABS Description and Operation (W/O JL4) |
|
TOW/HAUL |
Tow/Haul:
|
| Turn Signal: Refer to Exterior Lighting Systems Description and Operation | |
| Wait to Start: Refer to Engine Control Module (ECM) Description | |
| Water in Fuel: Refer to Indicator/Warning Message Description and Operation |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.