Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003VENTURE BASE, VAN CARGO EXTENDEDREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSSUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM
2003 Chevrolet Venture Base, Van Cargo Extended
Supplemental Inflatable Restraint System
2003 Chevrolet Venture Base, Van Cargo ExtendedSECTION Supplemental Inflatable Restraint System
- Description & Operation
- Component Locations
- System Operation Check
- Air Bag Safety Precautions
- Adjustments
- Disabling & Activating Air Bag System
- Disposal Procedures
- Post-Collision Inspection
- Removal & Installation
- Diagnostics
- Diagnostic Tests
- Air Bag Warning Light Circuit Malfunction
- DTC B0012,B0013,B0014, B0016,B0017,B0018: Passenger-Side Air Bag Deployment Loop Stage 2 Resistance Low/Stage 2 Resistance High/Stage 2 Voltage High/Stage 1 Resistance Low/Stage 1 Resistance High/Stage 1 Voltage High
- DTC B0022, B0024, B0026, B0042,B0043, B0044: Driver Deployment Loop Stage 1 Resistance Low/Stage1 Voltage High/Stage 1 Resistance High/Stage 2 Resistance Low/Stage 2 Voltage High/Stage 2 Resistance High
- DTC B0028, B0029, B0030: Passenger Side Impact Air Bag Deployment Loop Resistance Low/ Resistance High/Voltage High
- DTC B0040, B0041, B0045: Driver Side Impact Air Bag Deployment Loop Resistance Low/Resistance High/Voltage High
- DTC B0051: Deployment Commanded
- DTC B0053: Deployment Commanded With Loop Malfunction
- DTC B0057, B0058, B0059: Passenger-Side Seat Belt PRETENSIONER Deployment Loop Resistance Low/Resistance High/Voltage High
- DTC B0064, B0065, B0066: Driver-Side Seat Belt PRETENSIONER Deployment Loop Resistance Low/ Resistance High/Voltage High
- DTC B0077,B0078,B0079, B0080,B0081,B0082: Driver-Side Sis Valid Identification Message Not Received/Passenger-Side Sis Valid Identification Message Not Received/Driver-Side Sis Identification Error/Driver-Side Sis NOK Message/Passenger-Side Sis Identification Error/Passenger-Side Sis NOK Message
- DTC B0100, B0101, B0102,B0103, B0104, B0105: Passenger-Side EFS Valid Identification Message Not Received/Driver-Side EFS NOK Message/ Passenger-Side EFS Incorrect Identification Message/Driver-Side EFS Valid Identification Message Not Received/Passenger-Side EFS NOK Message/Driver-Side EFS Incorrect Identification Message
- DTC B1000: SDM Malfunction
- DTC B1001: Option Configuration Error
- Wire Repair
- Torque Specifications
- Wiring Diagrams
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.