Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBODY CONTROL MODULESSELF-DIAGNOSTIC SYSTEMELECTRONIC BRAKE CONTROL MODULE DIAGNOSTIC SYSTEM CHECK
2001 Chevrolet Cavalier LS, 2.4 T
Electronic Brake Control Module Diagnostic System Check
2001 Chevrolet Cavalier LS, 2.4 TSECTION Electronic Brake Control Module Diagnostic System Check
- Connect scan tool to Data Link Connector (DLC). DLC is located on lower left side of instrument panel, near steering column. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST A: SCAN TOOL DOES NOT POWER UP under SYSTEM TESTS.
- Turn ignition switch to RUN position. Attempt to establish communication with Body Control Module (BCM), Electronic Brake Control Module (EBCM), Instrument Panel Cluster (IPC) and Powertrain Control Module (PCM). If scan tool communicates with BCM, EBCM, IPC and PCM, go to next step. If scan tool does not communicate with BCM, EBCM, IPC and PCM, go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE under SYSTEM TESTS.
- Select DISPLAY DTCs function for BCM, EBCM, IPC and PCM on scan tool. If any DTCs are retrieved, go to next step. If no DTCs are retrieved, diagnose and repair anti-lock brake system by symptom. See appropriate ANTI-LOCK article in BRAKES.
- If communication DTCs (DTCs beginning with a "U") are not retrieved, go to next step. If any DTCs beginning with "U" are retrieved, go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE under SYSTEM TESTS.
- If DTC B1000 or B1001 are not retrieved, go to next step. If DTC B1000 or B1001 are retrieved, go to DTC B1000: BODY CONTROL MODULE MALFUNCTION and/or DTC B1001: OPTION CONFIGURATION ERROR .
- If DTC B1328 is retrieved:
- On 2001 models, see GENERATORS & REGULATORS article in ELECTRICAL.
- On 2002 models, see GENERATORS & REGULATORS article in ELECTRICAL.
If DTC B1328 is not retrieved, see DIAGNOSTIC TROUBLE CODE DEFINITIONS .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.