Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Turn Signal/MULTIFUNCTION Switch (Cavalier & SUNFIRE): Removal
2001 Chevrolet Cavalier LS, 2.4 TSECTION Removal
- Disable air bag system. See AIR BAG RESTRAINT SYSTEMS article. For 2002, see AIR BAG RESTRAINT SYSTEMS article. Remove steering wheel.
- Remove steering column trim covers. Remove tilt lever. Remove 4 screws from lower trim cover. Remove upper trim cover.
- Remove 2 retaining screws from multifunction switch (2). See Figure .
- Remove multifunction switch (2) from steering column.
- Disconnect electrical connectors from multifunction switch (2).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.