Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000CHEVY EXPRESS G2500, VAN PASSENGER, 6.5 FREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSREMOTE KEYLESS ENTRY SYSTEMS
2000 Chevrolet Chevy Express G2500, Van Passenger, 6.5 F
Remote Keyless Entry Systems
2000 Chevrolet Chevy Express G2500, Van Passenger, 6.5 FSECTION Remote Keyless Entry Systems
- Description
- Operation
- Component Locations
- Programming
- Trouble Shooting
- Symptom Tests
- Notes
- Test A: All Doors Lock Inoperative With Transmitter
- Test B: All Doors Unlock Inoperative With Transmitter
- Test C: Driver Door Lock/Unlock Inoperative
- Test D: Driver Door Lock Inoperative With Transmitter
- Test E: Driver Door Unlock Inoperative With Transmitter
- Test F: Keyless Entry System Inoperative
- Test G: Passenger Door Lock/Unlock Inoperative
- Test H: Passenger & Side Doors Lock/Unlock Inoperative
- Test I: Passenger & Side Doors Unlock Inoperative With Transmitter
- Test J: Rear Door Lock/Unlock Inoperative With Transmitter
- Test K: Remote Control Door Lock Receiver Does Not Program
- Test L: Side Door Attempts To Lock While Open
- Test M: Side Door Delayed Lock Inoperative
- Test N: Side Door Unlocks After Delayed Locking
- Component Tests
- Removal & Installation
- Wiring Diagrams
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.