System Tests: Notes

1993 Cadillac DeVille Base, 4D SedanSECTION Notes
SYMPTOM INDEX

Symptom Perform Test
Memory Seat (W/O Sixty Special Seat)
All Seat Functions Inoperative A 
Some, But Not All Seat Functions Inoperative B 
Pneumatic Controls (Sixty Special Seat)
Air Fills Lumbar Support Bladder But Will Not Hold Air Pressure For Extended Length Of Time C 
Air Will Not Fill Lumbar Support Bladder D 
Motor/Pump Inoperative E 
Neither Inflate Or Deflate Functions Operate (Seat Air Pump Motor Can Be Heard When At Least One Inflatable Support Adjustment Is Attempted) F 
Neither Inflate Or Deflate Functions Operate (Seat Air Pump Motor Cannot Be Heard When Any Inflatable Support Adjustment Is Attempted) G 
No Seat Functions Operate On Either Seat H 
One Or More But Not All Pneumatic Seat Functions Do Not Operate I 
Only Inflate Or Deflate Function Operates (Seat Air Pump Motor Cannot Be Heard When Inoperative Inflatable Support Adjustment Is Attempted) J 
Seat Air Pump Runs Continuously For More Than 20 Seconds & Selected Bladder Does Not Inflate K 
Power 6-Way Seat Adjuster
Horizontal Chuck Or Looseness L 
Horizontal Operation Of Seat Not Smooth (Jerky) - Apparent Hard Operation M 
One Adjuster Will Not Operate Horizontally N 
One Adjuster Will Not Operate Vertically O 
Reclining Seat
Left Seat & Right Seat Reclining Functions Do Not Operate P 
Motor Operates But Seat Back Does Not Move Q 
Operation Not Smooth (Jerky) R 
Seat Reclining Functions Operate For One Seat Only S 
Seat Reclining Functions Work In Only One Direction T 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.