SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2019ENVISION BASEREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR, ENTERTAINMENT, AND NAVIGATION SYSTEMREPAIR INSTRUCTIONSRADIO ANTENNA CABLE REPLACEMENT
2019 Buick Envision Base

Radio Antenna Cable Replacement

2019 Buick Envision BaseSECTION Radio Antenna Cable Replacement
GM3931511Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Liftgate Upper Trim Finish Panel Replacement
  2. Lower the rear of the headliner Headlining Trim Panel Replacement
1 Radio Antenna Cable

Procedure

  1. Disconnect the cable from the radio antenna amplifier.
  2. Disconnect the cable from radio and mobile telephone antenna cable.
  3. Disconnect the clips on the cable from several places on the roof panel.
  4. Pull cable with grommet through roof panel opening.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.