SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 150 (LIGHTING SYSTEM)REPAIR INSTRUCTIONSFRONT FOG LAMP REPLACEMENT
2013 Buick Regal Turbo Premium, Standard Trans

Front Fog Lamp Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Front Fog Lamp Replacement
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Fog Lamp
GM2356938Courtesy of GENERAL MOTORS COMPANY
Front Fog Lamp Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement .
  2. Remove the windshield washer solvent container. Refer to Windshield Washer Solvent Container Replacement .
1 Front Fog Lamp Screw (Qty: 2)
2 Front Fog Lamp Package

Procedure

  1. Release the front bumper fascia tab from the fog lamp assembly.
  2. Replace the fog lamp as an assembly.
  3. Aim the front fog lamps after installation. Refer to Fog Lamp Aiming .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.