SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSFIXED AND MOVEABLE WINDOW SYSTEMREPAIR INSTRUCTIONSWINDSHIELD REPLACEMENTINSTALLATION PROCEDURE
2013 Buick Regal Turbo Premium, Standard Trans

Installation Procedure

2013 Buick Regal Turbo Premium, Standard TransSECTION Installation Procedure
  1. Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
  2. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement
  3. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement
  4. Install the windshield garnish molding. Refer to Windshield Side Garnish Molding Replacement .
  5. Install the inside rearview mirror. Refer to Inside Rearview Mirror Replacement .
  6. Install the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement .
  7. Install the inside ambient air temperature and moisture sensor. Refer to Inside Air Moisture and Windshield Temperature Sensor Replacement .
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  9. Close the hood.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.