Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISBODY & FRAMEMIRRORSMIRROR SYSTEMREPAIR INSTRUCTIONSINSIDE REARVIEW MIRROR REPLACEMENT

2013 Buick Regal Turbo Premium, Standard Trans

Inside Rearview Mirror Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Inside Rearview Mirror Replacement

Fig 1: Inside Rearview Mirror & Fastener

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Remove the inside rearview mirror mount plate cover. Refer to Inside Rearview Mirror Mount Plate Cover Replacement .

Inside Rearview Mirror Fastener

CAUTION:

Refer to Fastener Caution .

Tighten
2 (18 lb in)

Inside Rearview Mirror

Procedure

Disconnect the electrical connector.
With both hands on the mirror, rock it from side to side while sliding upward, this will assist in the releasing of the mirror from the mounting tab.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.