Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSBMW2010X6 ACTIVEHYBRIDREPAIR AND DIAGNOSISBODY & FRAMETOWING SYSTEMSTRAILERS - REPAIRLOADING PLATFORM86 10... DISASSEMBLY OF LEFT AND RIGHT LAMP HOUSINGSINSTALLATION

2010 BMW X6 ActiveHybrid

86 10... Disassembly of left and right lamp housings: Installation

2010 BMW X6 ActiveHybridSECTION Installation

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Left And Right Lamp Housings

Courtesy of BMW OF NORTH AMERICA, INC.

Drill out rivet connections (1).

Raise side sections (2, 3).

Pull out lamp housing (4) towards inside in direction of platform.

Fig 2: Drilling Out Rivet Connections And Lamp Housing

Courtesy of BMW OF NORTH AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.