Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2006X5 (E53) V8-4.8L (N62)REPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONP CODE CHARTSP1027
2006 BMW X5 (E53) V8-4.8L (N62)
P1027
2006 BMW X5 (E53) V8-4.8L (N62)SECTION P1027
2A62 - P1027
Information saved in
DME
Fault code
2A62 - P1027
Fault text
Valvetronic, adjustment range 2
Fault description
VVT-Self-Learning Function Faulty Lower Learning Range
(Bank 2)
Condition for fault identification
Test condition:
- Fault class:
Lower initialization window fault
Terminal condition: Terminal 15 ON
Voltage condition:
>= 9 V
Condition for fault memory entry
100 ms
Action in service
Check reluctor and mechanical components for wear and
stiction
Fault effect and breakdown warning
Driver information
Warning light:
none
Service instruction
none
Information saved in
DME
Fault code
2A62 - P1027
Fault text
Valvetronic, adjustment range 2
Fault description
VVT-Self-Learning Function Faulty Lower Learning Range
(Bank 2)
Condition for fault identification
Test condition:
- Fault class:
Lower initialization window fault
Terminal condition: Terminal 15 ON
Voltage condition:
>= 9 V
Condition for fault memory entry
100 ms
Action in service
Check reluctor and mechanical components for wear and
stiction
Fault effect and breakdown warning
Driver information
Warning light:
none
Service instruction
none
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.