61 1 150 Releasing tool kit

Note: For circular connector / press-out tool -Contains the kits 61 1 130, 61 1 140 and 61 1 180 Replaced by special tool 61 0 300 from 09/2005.

Series: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E65, E66, E83, E85, R50, R53, RR1

Storage location: K 106

Order number: 61 1 150

Releasing tool kit

Consisting of:

61 1 151 Pressing-out tool

Note: For Power-Timer contacts / AMP and Bosch Replaced by special tool 61 0 315 from 09/2005.

61 1 152 Pressing-out tool

Note: For Micro-Timer contacts Replaced by special tool 61 0 323 from 09/2005.

61 1 153 Release tool

Note: For retaining tabs of relay holder

61 1 154 Replacement sleeve dia. 1.5 mm for 61 1 139

Note: Order number was temporarily assigned for case inlay in 8/95 on delivery of case Replaced by special tool 61 0 311 from 09/2005.

61 1 155 Replacement sleeve dia. 3.5 mm for 61 1 133

Note: Replaced by special tool 61 0 306 from 09/2005.

61 1 156 Replacement sleeve dia. 2.5 mm for 61 1 132

Note: Replaced by special tool 61 0 304 from 09/2005.

61 1 157 Replacement sleeve dia. 1.5 mm for 61 1 131

Note: Replaced by special tool 61 0 302 from 09/2005.

61 1 158 Case with inlay

Note: Replaced by special tool 61 0 329 from 09/2005.

61 1 159 Operating instructions

61 1 131 Pressing-out tool

Note: Replaced by special tool 61 0 301 from 09/2005

61 1 132 Pressing-out tool

Note: For 2.5 mm round contacts Replaced by special tool 61 0 303 from 09/2005.

61 1 133 Pressing-out tool

Note: For 3.5 mm round contacts. Replaced by special tool 61 0 305 from 09/2005.

61 1 134 Pressing-out tool

Note: For mini flat spring contacts. Replaced by special tool 61 0 312 from 09/2005.

61 1 135 Pressing-out tool

Note: For standard flat spring contacts. Replaced by special tool 61 0 314 from 09/2005.

61 1 136 Press-out tool

Note: For Power-Timer contacts (G & H). Replaced by special tool 61 0 316 from 09/2005.

61 1 137 Pressing-out tool

Note: For Timer contacts. Replaced by special tool 61 0 313 from 09/2005.

61 1 138 Socket wrench

Note: For telltale lamps (instrument cluster)

61 1 139 Pressing-out tool

Note: Slotted sleeve for Kostal round contacts with 1.5 mm dia. Replaced by special tool 61 0 311 from 09/2005.

61 1 141 Releasing tool

Note: For D 2.5 / ELA, 4-pin, round

61 1 142 Releasing tool

Note: For D 2.5 / ELA, 7-pin, round

61 1 143 Releasing tool

Note: For D 2.5 / ELA, 12-pin, round

61 1 144 Releasing tool

Note: For D 2.5 / ELA, 25-pin, round

61 1 145 Releasing tool

Note: For D 1 5 / ELA 10-pin round

61 1 149 Replacement blades

Note: For press-out tool 61 1 148

61 1 148 Press-out tool for SLK

Note: SLK = Sensor Laminated Contacts. Replaced by special tool 61 0 319 from 09/2005.

61 1 180 Press-out tool

Note: For load current contacts Replaced by special tool 61 0 318 from 09/2005.