Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 31 492 Replacing level switch for windscreen washer system
Release screws (1).
Detach cover (2) from front underride protection (3) and feed out in direction of arrow.
Remove cover (2).
E60, E61 with M aerodynamic kit only:
Catch any escaping washer fluid if necessary.
Unfasten plug connection (1) and disconnect.
Turn level switch for windscreen washer system (2) in direction of arrow, pull down out of fluid reservoir (3) and remove.
All others:
Catch any escaping washer fluid if necessary.
Unfasten plug connection (1) and disconnect.
Turn level switch for windscreen washer system (2) in direction of arrow, pull down out of fluid reservoir (3) and remove.
Installation:
Fill fluid tank for windscreen washer system.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.