Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Diagnostic Trouble Codes - DTC P0010 - DTC P1199 (N62, N73)
2006 BMW 760LiSECTION Diagnostic Trouble Codes - DTC P0010 - DTC P1199 (N62, N73)
- Me9.2.2 Engine Operating System DTCS
- Notes
- DTC P0010, BMW Hex Code 0x2A80, BMW Code 10880: 'A' Camshaft Position - Actuator Circuit/Open (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0011, BMW Hex Code 0x2A8A, BMW Code 10890: 'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0012, BMW Hex Code 0x2A83, BMW Code 10883: 'A' Camshaft Position - Timing Over-Retarded (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0013, BMW Hex Code 0x2A85, BMW Code 10885: 'B' Camshaft Position - Actuator Circuit/Open (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0014, BMW Hex Code 0x2A8C, BMW Code 10892: 'B' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0015, BMW Hex Code 0x2A88, BMW Code 10888: 'B' Camshaft Position - Timing Over-Retarded (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0016, BMW Hex Code 0x2A8E, BMW Code 10894: Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0017, BMW Hex Code 0x2A90, BMW Code 10896: Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0018, BMW Hex Code 0x2A8F, BMW Code 10895: Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0019, BMW Hex Code 0x2A91, BMW Code 10897: Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor B) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0020, BMW Hex Code 0x2A81, BMW Code 10881: 'A' Camshaft Position - Actuator Circuit/Open (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0021, BMW Hex Code 0x2A8B, BMW Code 10891: 'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0022, BMW Hex Code 0x2A84, BMW Code 10884: 'A' Camshaft Position - Timing Over-Retarded (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0023, BMW Hex Code 0x2A86, BMW Code 10886: 'B' Camshaft Position - Actuator Circuit/Open (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0024, BMW Hex Code 0x2A8D, BMW Code 10893: 'B' Camshaft Position - Timing Over-Advanced or System Performance (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0025, BMW Hex Code 0x2A89, BMW Code 10889: 'B' Camshaft Position - Timing Over-Retarded (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0030, BMW Hex Code 0x2C9C, BMW Code 11420: HO2S Heater Control Circuit (Bank 1 Sensor 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0031, BMW Hex Code 0x2C9C, BMW Code 11420: HO2S Heater Control Circuit Low (Bank 1 Sensor 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0032, BMW Hex Code 0x2C9C, BMW Code 11420: HO2S Heater Control Circuit High (Bank 1 Sensor 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0036, BMW Hex Code 0x2C9E, BMW Code 11422: HO2S Heater Control Circuit (Bank 1 Sensor 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0037, BMW Hex Code 0x2C9E, BMW Code 11422: HO2S Heater Control Circuit Low (Bank 1 Sensor 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0038, BMW Hex Code 0x2C9E, BMW Code 11422: HO2S Heater Control Circuit High (Bank 1 Sensor 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0040, BMW Hex Code 0x2C24, BMW Code 11300: O2 Sensor Signals Swapped Bank 1 Sensor 1 / Bank 2 Sensor 1 (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0050, BMW Hex Code 0x2C9D, BMW Code 11421: HO2S Heater Control Circuit (Bank 2 Sensor 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0051, BMW Hex Code 0x2C9D, BMW Code 11421: HO2S Heater Control Circuit Low (Bank 2 Sensor 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0052, BMW Hex Code 0x2C9D, BMW Code 11421: HO2S Heater Control Circuit High (Bank 2 Sensor 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0056, BMW Hex Code 0x2C9F, BMW Code 11423: HO2S Heater Control Circuit (Bank 2 Sensor 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0057, BMW Hex Code 0x2C9F, BMW Code 11423: HO2S Heater Control Circuit Low (Bank 2 Sensor 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0058, BMW Hex Code 0x2C9F, BMW Code 11423: HO2S Heater Control Circuit High (Bank 2 Sensor 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0071, BMW Hex Code 0x2BC0, BMW Code 11200: Ambient Air Temperature Sensor Range/Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0071, BMW Hex Code 0x2BC0, BMW Code 11200: Ambient Air Temperature Sensor Range/Performance (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0100, BMW Hex Code 0x2D0F, BMW Code 11535: Mass or Volume Air Flow 'A' Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0102, BMW Hex Code 0x2D0F, BMW Code 11535: Mass or Volume Air Flow 'A' Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0103, BMW Hex Code 0x2D0F, BMW Code 11535: Mass or Volume Air Flow 'A' Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0111, BMW Hex Code 0x2F09, BMW Code 12041: Intake Air Temperature Sensor 1 Circuit Range/Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0112, BMW Hex Code 0x2F08, BMW Code 12040: Intake Air Temperature Sensor 1 Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0113, BMW Hex Code 0x2F08, BMW Code 12040: Intake Air Temperature Sensor 1 Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0116, BMW Hex Code 0x2EE1, BMW Code 12001: Engine Coolant Temperature Sensor 1 Circuit Range/Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0117, BMW Hex Code 0x2EE0, BMW Code 12000: Engine Coolant Temperature Sensor 1 Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0118, BMW Hex Code 0x2EE0, BMW Code 12000: Engine Coolant Temperature Sensor 1 Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0120, BMW Hex Code 0x2CF8, BMW Code 11512: Throttle/Pedal Position Sensor/Switch 'A' Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0121, BMW Hex Code 0x2CF9, BMW Code 11513: Throttle/Pedal Position Sensor/Switch 'A' Circuit Range/Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0122, BMW Hex Code 0x2CF9, BMW Code 11513: Throttle/Pedal Position Sensor/Switch 'A' Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0123, BMW Hex Code 0x2CF9, BMW Code 11513: Throttle/Pedal Position Sensor/Switch 'A' Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0125, BMW Hex Code 0x2EE1, BMW Code 12001: Insufficient Coolant Temperature for Closed Loop Fuel Control (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0128, BMW Hex Code 0x2EF4, BMW Code 12020: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0130, BMW Hex Code 0x2C61, BMW Code 11361: O2 Sensor Circuit (Bank 1 Sensor 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0131, BMW Hex Code 0x2C47, BMW Code 11335: O2 Sensor Circuit Low Voltage (Bank 1 Sensor 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0132, BMW Hex Code 0x2C47, BMW Code 11335: O2 Sensor Circuit High Voltage (Bank 1 Sensor 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0133, BMW Hex Code 0x2C39, BMW Code 11321: O2 Sensor Circuit Slow Response (Bank 1 Sensor 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0135, BMW Hex Code 0x2CA0, BMW Code 11424: O2 Sensor Heater Circuit (Bank 1 Sensor 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0136, BMW Hex Code 0x2C71, BMW Code 11377: O2 Sensor Circuit (Bank 1 Sensor 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0137, BMW Hex Code 0x2C71, BMW Code 11377: O2 Sensor Circuit Low Voltage (Bank 1 Sensor 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0138, BMW Hex Code 0x2C71, BMW Code 11377: O2 Sensor Circuit High Voltage (Bank 1 Sensor 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0139, BMW Hex Code 0x2C6D, BMW Code 11373: O2 Sensor Circuit Slow Response (Bank 1 Sensor 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0140, BMW Hex Code 0x2C71, BMW Code 11377: O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0141, BMW Hex Code 0x2CA8, BMW Code 11432: O2 Sensor Heater Circuit (Bank 1 Sensor 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0150, BMW Hex Code 0x2C62, BMW Code 11362: O2 Sensor Circuit (Bank 2 Sensor 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0151, BMW Hex Code 0x2C48, BMW Code 11336: O2 Sensor Circuit Low Voltage (Bank 2 Sensor 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0152, BMW Hex Code 0x2C48, BMW Code 11336: O2 Sensor Circuit High Voltage (Bank 2 Sensor 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0153, BMW Hex Code 0x2C3A, BMW Code 11322: O2 Sensor Circuit Slow Response (Bank 2 Sensor 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0155, BMW Hex Code 0x2CA1, BMW Code 11425: O2 Sensor Heater Circuit (Bank 2 Sensor 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0156, BMW Hex Code 0x2C72, BMW Code 11378: O2 Sensor Circuit (Bank 2 Sensor 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0157, BMW Hex Code 0x2C72, BMW Code 11378: O2 Sensor Circuit Low Voltage (Bank 2 Sensor 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0158, BMW Hex Code 0x2C72, BMW Code 11378: O2 Sensor Circuit High Voltage (Bank 2 Sensor 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0159, BMW Hex Code 0x2C6E, BMW Code 11374: O2 Sensor Circuit Slow Response (Bank 2 Sensor 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0160, BMW Hex Code 0x2C72, BMW Code 11378: O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0161, BMW Hex Code 0x2CA9, BMW Code 11433: O2 Sensor Heater Circuit (Bank 2 Sensor 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0201, BMW Hex Code 0x2E30, BMW Code 11824: Injector Circuit/Open - Cylinder 1 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0202, BMW Hex Code 0x2E31, BMW Code 11825: Injector Circuit/Open - Cylinder 2 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0203, BMW Hex Code 0x2E32, BMW Code 11826: Injector Circuit/Open - Cylinder 3 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0204, BMW Hex Code 0x2E33, BMW Code 11827: Injector Circuit/Open - Cylinder 4 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0205, BMW Hex Code 0x2E34, BMW Code 11828: Injector Circuit/Open - Cylinder 5 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0206, BMW Hex Code 0x2E35, BMW Code 11829: Injector Circuit/Open - Cylinder 6 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0207, BMW Hex Code 0x2E36, BMW Code 11830: Injector Circuit/Open - Cylinder 7 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0208, BMW Hex Code 0x2E37, BMW Code 11831: Injector Circuit/Open - Cylinder 8 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0221, BMW Hex Code 0x2CFA, BMW Code 11514: Throttle/Pedal Position Sensor/Switch 'B' Circuit Range/Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0222, BMW Hex Code 0x2CFA, BMW Code 11514: Throttle/Pedal Position Sensor/Switch 'B' Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0223, BMW Hex Code 0x2CFA, BMW Code 11514: Throttle/Pedal Position Sensor/Switch 'B' Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0261, BMW Hex Code 0x2E30, BMW Code 11824: Cylinder 1 Injector Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0262, BMW Hex Code 0x2E30, BMW Code 11824: Cylinder 1 Injector Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0264, BMW Hex Code 0x2E31, BMW Code 11825: Cylinder 2 Injector Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0265, BMW Hex Code 0x2E31, BMW Code 11825: Cylinder 2 Injector Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0267, BMW Hex Code 0x2E32, BMW Code 11826: Cylinder 3 Injector Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0268, BMW Hex Code 0x2E32, BMW Code 11826: Cylinder 3 Injector Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0270, BMW Hex Code 0x2E33, BMW Code 11827: Cylinder 4 Injector Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0271, BMW Hex Code 0x2E33, BMW Code 11827: Cylinder 4 Injector Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0273, BMW Hex Code 0x2E34, BMW Code 11828: Cylinder 5 Injector Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0274, BMW Hex Code 0x2E34, BMW Code 11828: Cylinder 5 Injector Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0276, BMW Hex Code 0x2E35, BMW Code 11829: Cylinder 6 Injector Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0277, BMW Hex Code 0x2E35, BMW Code 11829: Cylinder 6 Injector Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0279, BMW Hex Code 0x2E36, BMW Code 11830: Cylinder 7 Injector Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0280, BMW Hex Code 0x2E36, BMW Code 11830: Cylinder 7 Injector Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0282, BMW Hex Code 0x2E37, BMW Code 11831: Cylinder 8 Injector Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0283, BMW Hex Code 0x2E37, BMW Code 11831: Cylinder 8 Injector Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0298, BMW Hex Code 0x2F17, BMW Code 12055: Engine Oil Over Temperature (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0300, BMW Hex Code 0x29CC, BMW Code 10700: Random/Multiple Cylinder Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0300, BMW Hex Code 0x29CC, BMW Code 10700: Random/Multiple Cylinder Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0300, BMW Hex Code 0x29CC, BMW Code 10700: Random/Multiple Cylinder Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0301, BMW Hex Code 0x29CD, BMW Code 10701: Cylinder 1 Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0301, BMW Hex Code 0x29CD, BMW Code 10701: Cylinder 1 Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0301, BMW Hex Code 0x29CD, BMW Code 10701: Cylinder 1 Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0302, BMW Hex Code 0x29CE, BMW Code 10702: Cylinder 2 Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0302, BMW Hex Code 0x29CE, BMW Code 10702: Cylinder 2 Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0302, BMW Hex Code 0x29CE, BMW Code 10702: Cylinder 2 Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0303, BMW Hex Code 0x29CF, BMW Code 10703: Cylinder 3 Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0303, BMW Hex Code 0x29CF, BMW Code 10703: Cylinder 3 Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0303, BMW Hex Code 0x29CF, BMW Code 10703: Cylinder 3 Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0304, BMW Hex Code 0x29D0, BMW Code 10704: Cylinder 4 Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0304, BMW Hex Code 0x29D0, BMW Code 10704: Cylinder 4 Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0304, BMW Hex Code 0x29D0, BMW Code 10704: Cylinder 4 Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0305, BMW Hex Code 0x29D1, BMW Code 10705: Cylinder 5 Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0305, BMW Hex Code 0x29D1, BMW Code 10705: Cylinder 5 Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0305, BMW Hex Code 0x29D1, BMW Code 10705: Cylinder 5 Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0306, BMW Hex Code 0x29D2, BMW Code 10706: Cylinder 6 Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0306, BMW Hex Code 0x29D2, BMW Code 10706: Cylinder 6 Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0306, BMW Hex Code 0x29D2, BMW Code 10706: Cylinder 6 Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0307, BMW Hex Code 0x29D3, BMW Code 10707: Cylinder 7 Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0307, BMW Hex Code 0x29D3, BMW Code 10707: Cylinder 7 Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0307, BMW Hex Code 0x29D3, BMW Code 10707: Cylinder 7 Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0308, BMW Hex Code 0x29D4, BMW Code 10708: Cylinder 8 Misfire Detected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0308, BMW Hex Code 0x29D4, BMW Code 10708: Cylinder 8 Misfire Detected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0308, BMW Hex Code 0x29D4, BMW Code 10708: Cylinder 8 Misfire Detected (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0313, BMW Hex Code 0x29D9, BMW Code 10713: Misfire Detected With Low Fuel (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0325, BMW Hex Code 0x2E68, BMW Code 11880: Knock Sensor 1 Circuit (Bank 1 or Single Sensor) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0327, BMW Hex Code 0x2E68, BMW Code 11880: Knock Sensor 1 Circuit Low (Bank 1 or Single Sensor) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0328, BMW Hex Code 0x2E68, BMW Code 11880: Knock Sensor 1 Circuit High (Bank 1 or Single Sensor) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0335, BMW Hex Code 0x2B5C, BMW Code 11100: Crankshaft Position Sensor 'A' Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0336, BMW Hex Code 0x2B5C, BMW Code 11100: Crankshaft Position Sensor 'A' Circuit Range/Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0340, BMW Hex Code 0x2B62, BMW Code 11106: Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0341, BMW Hex Code 0x2B62, BMW Code 11106: Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 1 or Single Sensor) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0342, BMW Hex Code 0x2B62, BMW Code 11106: Camshaft Position Sensor 'A' Circuit Low (Bank 1 or Single Sensor) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0343, BMW Hex Code 0x2B62, BMW Code 11106: Camshaft Position Sensor 'A' Circuit High (Bank 1 or Single Sensor) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0345, BMW Hex Code 0x2B64, BMW Code 11108: Camshaft Position Sensor 'A' Circuit (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0346, BMW Hex Code 0x2B64, BMW Code 11108: Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0347, BMW Hex Code 0x2B64, BMW Code 11108: Camshaft Position Sensor 'A' Circuit Low (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0348, BMW Hex Code 0x2B64, BMW Code 11108: Camshaft Position Sensor 'A' Circuit High (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0351, BMW Hex Code 0x2E24, BMW Code 11812: Ignition Coil 'A' Primary/Secondary Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0352, BMW Hex Code 0x2E25, BMW Code 11813: Ignition Coil 'B' Primary/Secondary Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0353, BMW Hex Code 0x2E26, BMW Code 11814: Ignition Coil 'C' Primary/Secondary Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0354, BMW Hex Code 0x2E27, BMW Code 11815: Ignition Coil 'D' Primary/Secondary Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0355, BMW Hex Code 0x2E28, BMW Code 11816: Ignition Coil 'E' Primary/Secondary Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0356, BMW Hex Code 0x2E29, BMW Code 11817: Ignition Coil 'F' Primary/Secondary Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0357, BMW Hex Code 0x2E2A, BMW Code 11818: Ignition Coil 'G' Primary/Secondary Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0358, BMW Hex Code 0x2E2B, BMW Code 11819: Ignition Coil 'H' Primary/Secondary Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0365, BMW Hex Code 0x2B63, BMW Code 11107: Camshaft Position Sensor 'B' Circuit (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0366, BMW Hex Code 0x2B63, BMW Code 11107: Camshaft Position Sensor 'B' Circuit Range/Performance (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0367, BMW Hex Code 0x2B63, BMW Code 11107: Camshaft Position Sensor 'B' Circuit Low (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0368, BMW Hex Code 0x2B63, BMW Code 11107: Camshaft Position Sensor 'B' Circuit High (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0370, BMW Hex Code 0x2B5D, BMW Code 11101: Timing Reference High Resolution Signal 'A' (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0372, BMW Hex Code 0x2B5D, BMW Code 11101: Timing Reference High Resolution Signal 'A' Too Few Pulses (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0373, BMW Hex Code 0x2B5D, BMW Code 11101: Timing Reference High Resolution Signal 'A' Intermittent/Erratic Pulses (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0390, BMW Hex Code 0x2B65, BMW Code 11109: Camshaft Position Sensor 'B' Circuit (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0391, BMW Hex Code 0x2B65, BMW Code 11109: Camshaft Position Sensor 'B' Circuit Range/Performance (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0392, BMW Hex Code 0x2B65, BMW Code 11109: Camshaft Position Sensor 'B' Circuit Low Input (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0393, BMW Hex Code 0x2B65, BMW Code 11109: Camshaft Position Sensor 'B' Circuit High Input (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0418, BMW Hex Code 0x2A03, BMW Code 10755: Secondary Air Injection System Control 'A' Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0420, BMW Hex Code 0x29F4, BMW Code 10740: Catalyst System Efficiency Below Threshold (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0430, BMW Hex Code 0x29F5, BMW Code 10741: Catalyst System Efficiency Below Threshold (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0441, BMW Hex Code 0x2A1A, BMW Code 10778: Evaporative Emission System Incorrect Purge Flow (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0442, BMW Hex Code 0x2A15, BMW Code 10773: Evaporative Emission System Leak Detected (small leak) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0444, BMW Hex Code 0x2A19, BMW Code 10777: Evaporative Emission System Purge Control Valve Circuit Open (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0455, BMW Hex Code 0x2A1B, BMW Code 10779: Evaporative Emission System Leak Detected (large leak) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0456, BMW Hex Code 0x2A14, BMW Code 10772: Evaporative Emission System Leak Detected (very small leak) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0456, BMW Hex Code 0x2A16, BMW Code 10774: Evaporative Emission System Leak Detected (very small leak) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0458, BMW Hex Code 0x2A19, BMW Code 10777: Evaporative Emission System Purge Control Valve Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0459, BMW Hex Code 0x2A19, BMW Code 10777: Evaporative Emission System Purge Control Valve Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0460, BMW Hex Code 0x2A1E, BMW Code 10782: Fuel Level Sensor 'A' Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0461, BMW Hex Code 0x2A1D, BMW Code 10781: Fuel Level Sensor 'A' Circuit Range/Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0477, BMW Hex Code 0x2F6C, BMW Code 12140: Exhaust Pressure Control Valve Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0478, BMW Hex Code 0x2F6C, BMW Code 12140: Exhaust Pressure Control Valve High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0479, BMW Hex Code 0x2F6C, BMW Code 12140: Exhaust Pressure Control Valve Intermittent (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0480, BMW Hex Code 0x2EFE, BMW Code 12030: Fan 1 Control Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0500, BMW Hex Code 0x2F4E, BMW Code 12110: Vehicle Speed Sensor 'A' (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0501, BMW Hex Code 0x2F4F, BMW Code 12111: Vehicle Speed Sensor 'A' Range/Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0503, BMW Hex Code 0x2F4E, BMW Code 12110: Vehicle Speed Sensor 'A' Intermittent/Erratic/High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0506, BMW Hex Code 0x2B80, BMW Code 11136: Idle Air Control System RPM Lower Than Expected (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0507, BMW Hex Code 0x2B80, BMW Code 11136: Idle Air Control System RPM Higher Than Expected (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0512, BMW Hex Code 0x2F5A, BMW Code 12122: Starter Request Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0520, BMW Hex Code 0x2F7B, BMW Code 12155: Engine Oil Pressure Sensor/Switch Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0530, BMW Hex Code 0x2F12, BMW Code 12050: A/C Refrigerant Pressure Sensor 'A' Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0532, BMW Hex Code 0x2F12, BMW Code 12050: A/C Refrigerant Pressure Sensor 'A' Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0533, BMW Hex Code 0x2F12, BMW Code 12050: A/C Refrigerant Pressure Sensor 'A' Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0560, BMW Hex Code 0x2F8A, BMW Code 12170: System Voltage (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0561, BMW Hex Code 0x2F8A, BMW Code 12170: System Voltage Unstable (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0562, BMW Hex Code 0x2F8A, BMW Code 12170: System Voltage Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0563, BMW Hex Code 0x2F8A, BMW Code 12170: System Voltage High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0571, BMW Hex Code 0x2F62, BMW Code 12130: Brake Switch 'A' Circuit (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0597, BMW Hex Code 0x2EF5, BMW Code 12021: Thermostat Heater Control Circuit/Open (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0598, BMW Hex Code 0x2EF5, BMW Code 12021: Thermostat Heater Control Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0599, BMW Hex Code 0x2EF5, BMW Code 12021: Thermostat Heater Control Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0604, BMW Hex Code 0x2B9A, BMW Code 11162: Internal Control Module Random Access Memory (RAM) Error (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0605, BMW Hex Code 0x2B9B, BMW Code 11163: Internal Control Module Read Only Memory (ROM) Error (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0606, BMW Hex Code 0x2B9C, BMW Code 11164: ECM/PCM Processor (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0606, BMW Hex Code 0x2B9C, BMW Code 11164: ECM/PCM Processor (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0606, BMW Hex Code 0x2B9C, BMW Code 11164: ECM/PCM Processor (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P060A, BMW Hex Code 0x2D72, BMW Code 11634: Internal Control Module Monitoring Processor Performance (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P061F, BMW Hex Code 0x2CEF, BMW Code 11503: Internal Control Module Throttle Actuator Controller Performance (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0620, BMW Hex Code 0x2E97, BMW Code 11927: Generator Control Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0691, BMW Hex Code 0x2EFE, BMW Code 12030: Fan 1 Control Circuit Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0692, BMW Hex Code 0x2EFE, BMW Code 12030: Fan 1 Control Circuit High (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0704, BMW Hex Code 0x2F67, BMW Code 12135: Clutch Switch Input Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P0A3B, BMW Hex Code 0x2E97, BMW Code 11927: Generator Over Temperature (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1000, BMW Hex Code 0x2A6F, BMW Code 10863: VVT-System Min. Stroke Adaptation Number of Stops Exceeded (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1001, BMW Hex Code 0x2A58, BMW Code 10840: VVT-Limp Home Request High Input (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1002, BMW Hex Code 0x2A58, BMW Code 10840: VVT-Limp Home Request Low Input (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1003, BMW Hex Code 0x2A58, BMW Code 10840: VVT-Limp Home Request Open Circuit (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1004, BMW Hex Code 0x2A59, BMW Code 10841: VVT-Guiding Sensor Solenoid Loss (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1005, BMW Hex Code 0x2A59, BMW Code 10841: VVT-Guiding Sensor Reset Error (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1006, BMW Hex Code 0x2A59, BMW Code 10841: VVT-Guiding Sensor Parity Error (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1007, BMW Hex Code 0x2A59, BMW Code 10841: VVT-Guiding Sensor Gradient Error (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1008, BMW Hex Code 0x2A5A, BMW Code 10842: VVT-Guiding Sensor Solenoid Loss (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1009, BMW Hex Code 0x2A5A, BMW Code 10842: VVT-Guiding Sensor Reset Error (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1010, BMW Hex Code 0x2A5A, BMW Code 10842: VVT-Guiding Sensor Parity Error (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1011, BMW Hex Code 0x2A5A, BMW Code 10842: VVT-Guiding Sensor Gradient Error (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1012, BMW Hex Code 0x2A5B, BMW Code 10843: VVT-Reference Sensor Solenoid Loss (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1013, BMW Hex Code 0x2A5B, BMW Code 10843: VVT-Reference Sensor Reset Error (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1014, BMW Hex Code 0x2A5B, BMW Code 10843: VVT-Reference Sensor Parity Error (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1015, BMW Hex Code 0x2A5B, BMW Code 10843: VVT-Reference Sensor Gradient Error (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1017, BMW Hex Code 0x2A5D, BMW Code 10845: VVT-Sensors Plausibility (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1018, BMW Hex Code 0x2A5E, BMW Code 10846: VVT-Sensors Plausibility (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1019, BMW Hex Code 0x2A5F, BMW Code 10847: VVT-Supply Voltage Sensors High Input (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1020, BMW Hex Code 0x2A5F, BMW Code 10847: VVT-Supply Voltage Sensors Low Input (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1021, BMW Hex Code 0x2A60, BMW Code 10848: VVT-Supply Voltage Sensors High Input (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1022, BMW Hex Code 0x2A60, BMW Code 10848: VVT-Supply Voltage Sensors Low Input (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1023, BMW Hex Code 0x2A61, BMW Code 10849: VVT-Self-Learning Function Faulty Adjustment Range (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1024, BMW Hex Code 0x2A61, BMW Code 10849: VVT-Self-Learning Function Faulty Lower Learning Range (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1025, BMW Hex Code 0x2A61, BMW Code 10849: VVT-Self-Learning Function No Positions Stored (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1026, BMW Hex Code 0x2A62, BMW Code 10850: VVT-Self-Learning Function Faulty Adjustment Range (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1027, BMW Hex Code 0x2A62, BMW Code 10850: VVT-Self-Learning Function Faulty Lower Learning Range (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1028, BMW Hex Code 0x2A62, BMW Code 10850: VVT-Self-Learning Function No Positions Stored (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1030, BMW Hex Code 0x2A63, BMW Code 10851: VVT-Actuator Monitoring Position Control, Control Deviation (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1031, BMW Hex Code 0x2A63, BMW Code 10851: VVT-Actuator Monitoring Recognition of Direction of Rotation Plausibility (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1033, BMW Hex Code 0x2A64, BMW Code 10852: VVT-Actuator Monitoring Position Control, Control Deviation (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1034, BMW Hex Code 0x2A64, BMW Code 10852: VVT-Actuator Monitoring Recognition of Direction of Rotation Plausibility (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1035, BMW Hex Code 0x2DDE, BMW Code 11742: VVT-CAN-Message Monitoring Faulty Desired Message (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1036, BMW Hex Code 0x2DDE, BMW Code 11742: VVT-CAN-Timeout VVT-Desired Message (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1037, BMW Hex Code 0x2DDE, BMW Code 11742: VVT-CAN-Timeout VVT-Message (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1038, BMW Hex Code 0x2DDF, BMW Code 11743: VVT-CAN-Message Monitoring Faulty Desired Message (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1039, BMW Hex Code 0x2DDF, BMW Code 11743: VVT-CAN-Timeout VVT-Desired Message (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1040, BMW Hex Code 0x2DDF, BMW Code 11743: VVT-CAN-Timeout VVT-Message (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1041, BMW Hex Code 0x2A65, BMW Code 10853: Internal VVT-Control Module EEPROM Error (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1042, BMW Hex Code 0x2A65, BMW Code 10853: Internal VVT-Control Module Random Access Memory (RAM) Error (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1043, BMW Hex Code 0x2A65, BMW Code 10853: Internal VVT-Control Module Read Only Memory (ROM) Error (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1044, BMW Hex Code 0x2A66, BMW Code 10854: Internal VVT-Control Module EEPROM Error (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1045, BMW Hex Code 0x2A66, BMW Code 10854: Internal VVT-Control Module Random Access Memory (RAM) Error (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1046, BMW Hex Code 0x2A66, BMW Code 10854: Internal VVT-Control Module Read Only Memory (ROM) Error (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1047, BMW Hex Code 0x2A67, BMW Code 10855: VVT-Control Circuit High Input (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1048, BMW Hex Code 0x2A67, BMW Code 10855: VVT-Control Circuit Low Input (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1049, BMW Hex Code 0x2A67, BMW Code 10855: VVT-Control Circuit Engine Cables Short Circuit (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1050, BMW Hex Code 0x2A67, BMW Code 10855: VVT-Control Circuit (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1051, BMW Hex Code 0x2A68, BMW Code 10856: VVT-Control Circuit High Input (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1052, BMW Hex Code 0x2A68, BMW Code 10856: VVT-Control Circuit Low Input (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1053, BMW Hex Code 0x2A68, BMW Code 10856: VVT-Control Circuit Engine Cables Short Circuit (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1054, BMW Hex Code 0x2A68, BMW Code 10856: VVT-Control Circuit (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1055, BMW Hex Code 0x2A69, BMW Code 10857: VVT-Supply Voltage Control Motor High Input (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1056, BMW Hex Code 0x2A69, BMW Code 10857: VVT-Supply Voltage Control Motor Low Input (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1057, BMW Hex Code 0x2A69, BMW Code 10857: VVT-Supply Voltage Control Motor Electrical (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1058, BMW Hex Code 0x2A6A, BMW Code 10858: VVT-Supply Voltage Control Motor High Input (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1059, BMW Hex Code 0x2A6A, BMW Code 10858: VVT-Supply Voltage Control Motor Low Input (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1060, BMW Hex Code 0x2A6A, BMW Code 10858: VVT-Supply Voltage Control Motor Electrical (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1061, BMW Hex Code 0x2A6B, BMW Code 10859: VVT-Limp Home Request RPM and Charge Limitation (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1062, BMW Hex Code 0x2A6B, BMW Code 10859: VVT-Limp Home Request Full Stroke Position not Reached (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1063, BMW Hex Code 0x2A6B, BMW Code 10859: VVT-Limp Home Request Air Mass Plausibility (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1064, BMW Hex Code 0x2A6C, BMW Code 10860: VVT-Value Comparison Starting Position/Parking Position Plausibility (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1065, BMW Hex Code 0x2DDD, BMW Code 11741: VVT-CAN-Timeout No Signal (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1066, BMW Hex Code 0x2DDD, BMW Code 11741: VVT-CAN-Message Monitoring Faulty Actual Message (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1067, BMW Hex Code 0x2A5C, BMW Code 10844: VVT-Reference Sensor Solenoid Loss (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1068, BMW Hex Code 0x2A5C, BMW Code 10844: VVT-Reference Sensor Reset Error (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1069, BMW Hex Code 0x2A5C, BMW Code 10844: VVT-Reference Sensor Parity Error (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1070, BMW Hex Code 0x2A5C, BMW Code 10844: VVT-Reference Sensor Gradient Error (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1071, BMW Hex Code 0x2A65, BMW Code 10853: Internal VVT-Control Module Watchdog or Temperature Sensor Error (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1072, BMW Hex Code 0x2A66, BMW Code 10854: Internal VVT-Control Module Watchdog or Temperature Sensor Error (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1073, BMW Hex Code 0x2A5D, BMW Code 10845: VVT-Sensors Data Conformity (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1074, BMW Hex Code 0x2A5E, BMW Code 10846: VVT-Sensors Data Conformity (Bank 2 (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1075, BMW Hex Code 0x2A6D, BMW Code 10861: VVT-Overload Protection (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1076, BMW Hex Code 0x2A6D, BMW Code 10861: VVT-Overload Protection ECU-Temperature High Input (Bank 1) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1077, BMW Hex Code 0x2A6D, BMW Code 10861: VVT-Overload Protection Control Motor Temperature High Input (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1078, BMW Hex Code 0x2A6D, BMW Code 10861: VVT-Overload Protection Control Motor Current High Input (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1079, BMW Hex Code 0x2A6E, BMW Code 10862: VVT-Overload Protection (Bank 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1080, BMW Hex Code 0x2A6E, BMW Code 10862: VVT-Overload Protection ECU-Temperature High Input (Bank 2) (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1081, BMW Hex Code 0x2A6E, BMW Code 10862: VVT-Overload Protection Control Motor Temperature High Input (Bank 2) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1082, BMW Hex Code 0x2A6E, BMW Code 10862: VVT-Overload Protection Control Motor Current High Input (Bank 2) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1104, BMW Hex Code 0x2D29, BMW Code 11561: Differential Pressure Sensor Intake Manifold Pressure Too Low (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1104, BMW Hex Code 0x2D32, BMW Code 11570: Differential Pressure Sensor Intake Manifold Pressure Too Low (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1105, BMW Hex Code 0x2D29, BMW Code 11561: Differential Pressure Sensor Intake Manifold Pressure Too High (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1105, BMW Hex Code 0x2D32, BMW Code 11570: Differential Pressure Sensor Intake Manifold Pressure Too High (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P110F, BMW Hex Code 0x2BC1, BMW Code 11201: Ambient Air Temperature Sensor Faulty CAN Signal (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P111E, BMW Hex Code 0x2F09, BMW Code 12041: Intake Air Temperature Sensor 1 Maximum Temperature Implausible (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P111F, BMW Hex Code 0x2F09, BMW Code 12041: Intake Air Temperature Sensor 1 Minimum Temperature Implausible (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1127, BMW Hex Code 0x2F9E, BMW Code 12190: Engine Oil Level Sensor Signal Plausibility (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1128, BMW Hex Code 0x2F9E, BMW Code 12190: Engine Oil Level Sensor No Signal (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1129, BMW Hex Code 0x2F9E, BMW Code 12190: Engine Oil Level Sensor Signal Oil Level Too Low (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P112A, BMW Hex Code 0x2EE1, BMW Code 12001: Engine Coolant Temperature Sensor 1 Maximum Temperature Implausible (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P112B, BMW Hex Code 0x2EE1, BMW Code 12001: Engine Coolant Temperature Sensor 1 Minimum Temperature Implausible (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1130, BMW Hex Code 0x2C6D, BMW Code 11373: O2 Sensor Circuit Dynamic Test (Bank 1 Sensor 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1131, BMW Hex Code 0x2C6E, BMW Code 11374: O2 Sensor Circuit Dynamic Test (Bank 2 Sensor 2) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P113A, BMW Hex Code 0x2D14, BMW Code 11540: Mass or Volume Air Flow 1 Correction Signal Plausibility Period Too Long (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P113B, BMW Hex Code 0x2D14, BMW Code 11540: Mass or Volume Air Flow 1 Correction Signal Plausibility Period Too Short (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P113F, BMW Hex Code 0x2EE4, BMW Code 12004: Engine Coolant Temperature Sensor 1 Shunt (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P113F, BMW Hex Code 0x2EE4, BMW Code 12004: Engine Coolant Temperature Sensor 1 Shunt (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P113F, BMW Hex Code 0x2EE4, BMW Code 12004: Engine Coolant Temperature Sensor 1 Shunt (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P113F, BMW Hex Code 0x2EE4, BMW Code 12004: Engine Coolant Temperature Sensor 1 Shunt (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P115A, BMW Hex Code 0x2D13, BMW Code 11539: Mass or Volume Air Flow 'A' Maximum Exceeded (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P115B, BMW Hex Code 0x2D13, BMW Code 11539: Mass or Volume Air Flow 'A' Minimum Fallen Below (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P115C, BMW Hex Code 0x2D13, BMW Code 11539: Mass or Volume Air Flow 'A' Air Mass Too Low Compared to Model (SIG)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P115D, BMW Hex Code 0x2D13, BMW Code 11539: Mass or Volume Air Flow 'A' Air Mass Too High Compared to Model (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1197, BMW Hex Code 0x2D28, BMW Code 11560: Differential Pressure Sensor Intake Manifold High Input (Bank 1) (MAX)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1198, BMW Hex Code 0x2D28, BMW Code 11560: Differential Pressure Sensor Intake Manifold Low Input (Bank 1) (MIN)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
- DTC P1199, BMW Hex Code 0x2D29, BMW Code 11561: Differential Pressure Sensor Intake Manifold Pressure Plausibility (Bank 1) (PLAUS)
- BMW Fault Code (hex)
- BMW Fault Code (dez)
- BMW Fault Code Description VS-Text
- Component
- Subcomponent
- Monitoring criteria
- Fault debouncing
- Terminal conditions
- Voltage conditions
- Temperature conditions
- Time conditions
- System test
- Signal information
- Calculated value Y/N
- Possible Fault Causes
- Repair procedures (plant/service)
- MIL illumination/CC message/emergency program
- Remarks
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.