Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2006330CI COUPE (E46) L6-3.0L (M54)REPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSNAVIGATION SYSTEM - MISSING OR INCORRECT ROAD MAP DATA
2006 BMW 330Ci Coupe (E46) L6-3.0L (M54)
Navigation System - Missing or Incorrect Road Map Data
2006 BMW 330Ci Coupe (E46) L6-3.0L (M54)SECTION Navigation System - Missing or Incorrect Road Map Data
SI B 84 04 05
Phone, Navigation Systems
January 2007
Technical Service
This Service Information bulletin supersedes S.I. B84 04 05 dated April 2005.
[NEW] designates changes to this revision
SUBJECT
Navigation System Has Missing Or Incorrect DVD/CD Road Map Data
MODEL
Vehicles equipped with Navigation System (option609).
E39, E60, NEW E61 (5 Series)
E46, E90, NEW E91, NEW E92 (3 Series)
E52 (Z8)
E53, NEW E70 (X5)
E63, E64 (6 Series)
E38, E65, E66 (7 Series)
E83 (X3)
E85, [NEW] E86 (Z4)
SITUATION
The Navigation system route guidance is incorrect, navigation is not possible to certain addresses or road data is missing.
CAUSE
The NAVTEQ(R) DVD/CD Road Map has incorrect or missing data.
INFORMATION
Do not replace parts!
It is not a problem in the BMW Navigation systems. The Road Map disc data is the sole responsibility of NAVTEQ(R).
Inform the customer of the NAVTEQ(R) end-user license agreement which comes with the DVD/CD Road Map. (see attachments)
[NEW] The customer must report the error directly to NAVTEQ(R) .
[NEW]IMPORTANT:
- The customer must have the latest available NAVTEQ(R) Road Map before reporting an error. Road Map Error Reports on older Road Maps will not be processed by NAVTEQ(R).
- A valid email address must be provided so that NAVTEQ can reply to the customer feedback.
Additional information can be found on the NAVTEQ(R).
The NAVTEQ(R) web site has a section for reporting map errors (see attachments).
Disclaimer
Phone, Navigation Systems
January 2007
Technical Service
This Service Information bulletin supersedes S.I. B84 04 05 dated April 2005.
[NEW] designates changes to this revision
SUBJECT
Navigation System Has Missing Or Incorrect DVD/CD Road Map Data
MODEL
Vehicles equipped with Navigation System (option609).
E39, E60, NEW E61 (5 Series)
E46, E90, NEW E91, NEW E92 (3 Series)
E52 (Z8)
E53, NEW E70 (X5)
E63, E64 (6 Series)
E38, E65, E66 (7 Series)
E83 (X3)
E85, [NEW] E86 (Z4)
SITUATION
The Navigation system route guidance is incorrect, navigation is not possible to certain addresses or road data is missing.
CAUSE
The NAVTEQ(R) DVD/CD Road Map has incorrect or missing data.
INFORMATION
Do not replace parts!
It is not a problem in the BMW Navigation systems. The Road Map disc data is the sole responsibility of NAVTEQ(R).
Inform the customer of the NAVTEQ(R) end-user license agreement which comes with the DVD/CD Road Map. (see attachments)
[NEW] The customer must report the error directly to NAVTEQ(R) .
[NEW]IMPORTANT:
- The customer must have the latest available NAVTEQ(R) Road Map before reporting an error. Road Map Error Reports on older Road Maps will not be processed by NAVTEQ(R).
- A valid email address must be provided so that NAVTEQ can reply to the customer feedback.
Additional information can be found on the NAVTEQ(R).
The NAVTEQ(R) web site has a section for reporting map errors (see attachments).
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.