Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2006330CI COUPE (E46) L6-3.0L (M54)REPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSINTERIOR - ONE TOUCH MEMORY FUNCTION INFORMATION
2006 BMW 330Ci Coupe (E46) L6-3.0L (M54)
Interior - One Touch Memory Function Information
2006 BMW 330Ci Coupe (E46) L6-3.0L (M54)SECTION Interior - One Touch Memory Function Information
SI B 52 08 10
Seats
August 2010
Technical Service
SUBJECT
Front Seats: One Touch memory Function
MODELS
All models
SITUATION
There may be some confusion as to the operation of the "one touch memory function", when requesting a saved seat position. In most cases the operation is normal. This service information bulletin will clarify the normal operation below.
INFORMATION
When using the seat memory, there are two options for requesting a successfully saved seat position from the vehicle, depending on the operating mode.
1. With the vehicle unlocked and terminal 15 off, press the desired memory button once, briefly. The seat moves to the stored position. This is considered the "one-touch function".
2. With the vehicle unlocked and terminal 15 on (ignition on or while driving): the desired memory button must be pressed and held until the seat moves to final stored position. Under all circumstances, avoid moving the seat to a position which is uncomfortable for the driver while the vehicle is in motion. This situation does not allow the "one-touch function".
WARRANTY INFORMATION
For information only
Seats
August 2010
Technical Service
SUBJECT
Front Seats: One Touch memory Function
MODELS
All models
SITUATION
There may be some confusion as to the operation of the "one touch memory function", when requesting a saved seat position. In most cases the operation is normal. This service information bulletin will clarify the normal operation below.
INFORMATION
When using the seat memory, there are two options for requesting a successfully saved seat position from the vehicle, depending on the operating mode.
1. With the vehicle unlocked and terminal 15 off, press the desired memory button once, briefly. The seat moves to the stored position. This is considered the "one-touch function".
2. With the vehicle unlocked and terminal 15 on (ignition on or while driving): the desired memory button must be pressed and held until the seat moves to final stored position. Under all circumstances, avoid moving the seat to a position which is uncomfortable for the driver while the vehicle is in motion. This situation does not allow the "one-touch function".
WARRANTY INFORMATION
For information only
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.