SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2001Z3 2D CONVERTIBLE, 3.0 3, STANDARDREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENTSPECIFICATIONS & PROCEDURESWHEEL ALIGNMENT SPECIFICATIONSE65/66
2001 BMW Z3 2D Convertible, 3.0 3, Standard

Wheel Alignment Specifications: E65/66

2001 BMW Z3 2D Convertible, 3.0 3, StandardSECTION E65/66
WHEEL ALIGNMENT SPECIFICATIONS (745i & 745Li)

Application Preferred Range
Total Toe
Front .17° .03 To .3°
Rear .3° .13 To .47°
Camber (1)
Front -.1° -.52 To .32°
Rear -1.5° -1.83 To -1.17°
Track Differential Angle With 20° Lock On Inside Wheel (1) -1.45° -1.95 To -.95°
Caster (1)
With -10 To 10° Wheel Lock 7.65° 7.15 To 8.15°
With -20 To 20° Wheel Lock 7.93° 7.43 To 8.43°
Front Wheel Displacement 0° -.25 To .25°
Rear Geometrical Axis Deviation 0° -.2 To .2°
Maximum Wheel Lock
Inside Wheel About 40.7° N/A
Outside Wheel About 33.5° N/A
Turning Circle
745i About 39.9 Ft. (12.13 M) N/A
745Li About 41.3 Ft. (12.6 M) N/A
(1) Difference between left and right is maximum .5°.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.