MoDIC Cables/Leads

Diagnostic Cable







20 pin cable for connection of the diagnostic head to the 20 pin diagnostic socket


Serial Interface Cable








25 feet cable for a hard wire connection between the diagnostic head and the MoDiC.


DC Power Supply







External power supply cable for the MoDiC/Docking Station.

Allows vehicle 12 volt power supply to power the MoDiC or docking station.


Multi-Function Cable (MFK)







MFK 1 and MFK 2 measurement cables used with the MoDiC's measurement system. Both cables are 2 meters long.

Measuring parameters for the cables are similar to the DIS tester's MFK 1 and MFK 2 as follows:

MFK 1

Measuring Function Measuring Range
DC Voltage Measurement 0.1 - 50 Volts
AC Voltage Measurement 0.1 - 50 Volts
DC Current Measurement 0.2 - 2 Amps
AC current Measurement 0.2 - 2 Amps
Resistance Measurement 0 - 2 M ohms
Diode Testing
Frequency Measurement 1 Hz - 100 kHz
Pulse Duration Measurement 100 micro s - 10 s

MFK2

Measuring Function Measurement Range
DC Voltage Measurement 0.1 - 500 Volts
AC Voltage Measurement 0.1 - 500 Volts
Frequency Measurement 1 Hz - 100 kHz
Pulse Duration Measurement 100 micro s - 10 s

50 AMP Current Clamp

Measurement Function Measurement Range
DC Current Measurement 50 Amps
AC Current Measurement 50 Amps

Additional Cable ends supplied with the MoDiC include:







- Two measuring probes.
- Two adapter cables with 2 mm probe ends.
- Two adapter cables with 2.5 mm probe ends.
- Two adapter cables with 4 mm probe ends.
- Two spring clamp adapter ends.