Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2001330CI CONVERTIBLE (E46) L6-3.0L (M54)REPAIR AND DIAGNOSISBODY AND FRAMESEATSSPECIFICATIONS
2001 BMW 330Ci Convertible (E46) L6-3.0L (M54)
Seats: Specifications
2001 BMW 330Ci Convertible (E46) L6-3.0L (M54)SECTION Specifications
52 10 Front Seats
1AZ Seat to floor plate
M10 45 Nm
Torque angle 90°
2AZ Backrest frame to seat frame
E46 all except convertible
Note: Replace screws 32 Nm
7AZ Actuating unit to seat frame 10 (±2) Nm
8AZ Adjusting screw for eccentric element 1.4 Nm
9AZ Seat pan to seat frame 10 (±2) Nm
10AZ Microswitch to front seat 2 (±1) Nm
14AZ Backrest frame to seat frame - Screw
E46 convertible
Note: Replace screws 24 (+4) Nm
15AZ Backrest frame to seat frame - Pin with knurling and lock nut
E46 convertible
Note: Replace screws 40 (+5) Nm
16AZ Seat tilt adjuster to seat mechanism
M6 x 10 (trilobular) 9 Nm
Note: Replace Taptite screw
17AZ Seat tilt adjuster to seat pan 9 Nm
20AZ Kinematic element to backrest frame
E46 convertible 3 (+2) Nm
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.