SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSBMW2001325CI 2D CONVERTIBLE, AUTOMATICREPAIR AND DIAGNOSISENGINE MECHANICALMECHANICALBASIC MEASURING TECHNIQUES - OVERVIEWBASIC MEASURING TECHNIQUESMETRIC SYSTEMMETRIC SYSTEM CONVERSION CHARTS
2001 BMW 325Ci 2D Convertible, Automatic

Metric System Conversion Charts

2001 BMW 325Ci 2D Convertible, AutomaticSECTION Metric System Conversion Charts
METRIC SYSTEM CONVERSION CHARTS

Linear Measure to Metric Linear Measure (Metric) to English
1 inch = 2.54 cm 1 mm = 0.03937 inch
12 inches = 1 foot = 30.48 cm 1 cm = 0.39 inch
3 feet = 1 yard = 0.91 m 1 m = 39.37 inch
5.5 yards = 1 rod = 5.03 m 1 km = 0.62 miles
5280 feet = 1 mile = 1.61 km -
Square Measure to Metric  Square Measure (Metric) to English 
1 in2 = 6.45 cm2 1 mm2 = 0.002 in2
144 in2 = 1 ft 2 = 0.09 m2 1 cm2 = 0.16 in2
9 ft2 = 1 yd2 = 0.84 m2 1 m2 = 1549 in2
640 acres = 1mi2 = 2.59 km2 1 km2 = 0.39 mi2 = 247.10 acres
Cubic Measure to Metric  Cubic Measure (Metric) to English 
1 in3 = 16.39 cm3 1 mm3 = 0.000061 in3
1728 in3 = 1 yd3 = 0.76 m3 1 cm3 = 0.061 in3
27ft3 = 1 yd3 = 0.76 m3 1 m3 = 35.32 ft3
  1 km3 = 0.24 mi3
Liquid Measure to Metric  Liquid Measure (Metric) to English 
1.81 in3 = 1 fluid oz. = 30 ml 1 ml = 0.03 fluid oz = 0.061 in3
1 pint = 0.47 l 1000 cm3 = 1 l = 61.02 in3 = 1.06 qt
57.75 in3 = 1 quart = 0.95 l 1 ft3 water = 62.5 lb
231 in3 = 1 gal = 3.79 l = 0.0038 m3  
1 ft3 = 7.48 gal = 28.35 l  
Weights to Metric  Weight (Metric) to English 
1 0z = 28.35 g 1 g = 0.035 oz
1 lb = 453.59 g 1 kg = 2.20 lb
1 lb = 0.45 kg 1 metric ton = 1000 kg = 1.102 tons = 2205 lb
1 ton = .91 metric ton  
Temperature to Metric  Temperature to Fahrenheit 
F = 9/5C +32 C = 5/9 (F-32)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.