Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Powertrain Control Module (Pcm): Notes
All models except E46 use an 88-pin PCM. See Fig 1. E46 models use an PCM with 9-pin, 24-pin, 40-pin and 52-pin connectors. See Fig 2-Fig 5 . For PCM location, see PCM LOCATION table. PCM uses intake airflow, intake air temperature, throttle position, coolant temperature, engine speed, vehicle speed, crankshaft position, knock sensors and exhaust gas oxygen content intake signals to determine optimum fuel injection and ignition timing.
| Application | Location | |
|---|---|---|
| 3-Series | ||
| E36 | Behind Cover On Right Rear Side Of Firewall | |
| E46 | Inside Box On Left Rear Corner Of Engine Compartment | |
| All Others | Inside Box On Right Rear Corner Of Engine Compartment, Behind Strut Tower | |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.