Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Steering Column, Handling And Transporting
- The correct handling of the steering column must always be observed.
- Incorrect handling of steering column may cause damage to the steering column and therefore lead to a safety risk.
Correct Handling and Transport of Steering Column
- Transport steering column using two hands.
- Hold steering column at upper steering rod tube and in area of upper universal joint.
Incorrect Handling of Steering Column
Transporting at the following components leads to pre-damage to the steering column:
- Clamping Lever
- Weight Compensation Springs
- Deformation Element
Damage to the universal joint bushings on lower steering column bushing due to:
- Holding and carrying the steering column with a hand on the connecting shaft
- Bending joints more than 90°
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.