Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2008A3 BASE, 2.0 E, AUTOMATIC DCTREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSCONTROLS, HOUSING - DIRECT SHIFT AUTOMATIC TRANSMISSION 02E FWD34 CONTROLS, HOUSINGDESCRIPTION AND OPERATIONSUBFRAME MOUNT OVERVIEW
2008 Audi A3 Base, 2.0 E, Automatic DCT
SUBFRAME Mount Overview
2008 Audi A3 Base, 2.0 E, Automatic DCTSECTION SUBFRAME Mount Overview
- Bolt
- Replace
- 40 Nm plus an additional 90° turn
- Transmission support to transmission
- Bolts
- Replace
- 40 Nm plus an additional 90° turn
- Pendulum support to transmission
- Engine Support
- With support arm
- There are different versions
- Bolt
- Engine support to engine
- Tightening specification, refer to [For engine(s) CBRA] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) BPY] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) CCTA, CBFA] FASTENER TIGHTENING SPECIFICATIONS
- There are different lengths
- Engine Mount
- Bolt
- Engine mount to body
- Tightening specification, refer to [For engine(s) CBRA] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) BPY] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) CCTA, CBFA] FASTENER TIGHTENING SPECIFICATIONS
- Connecting Bar
- Bolt
- Connecting bar to engine
- Tightening specification, refer to [For engine(s) CBRA] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) BPY] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) CCTA, CBFA] FASTENER TIGHTENING SPECIFICATIONS
- Bolt
- Connecting bar to body
- Tightening specification, refer to [For engine(s) CBRA] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) BPY] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) CCTA, CBFA] FASTENER TIGHTENING SPECIFICATIONS
- Bolt
- Engine mount to body
- Tightening specification, refer to [For engine(s) CBRA] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) BPY] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) CCTA, CBFA] FASTENER TIGHTENING SPECIFICATIONS
- Bolts
- Engine mount to engine support
- Tightening specification, refer to [For engine(s) CBRA] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) BPY] FASTENER TIGHTENING SPECIFICATIONS , or refer to [For engine(s) CCTA, CBFA] FASTENER TIGHTENING SPECIFICATIONS
- Pendulum Support
- Refer to PENDULUM SUPPORT
- Bolt
- Replace
- 100 Nm plus an additional 90° turn
- Pendulum support to subframe
- Bolt
- Replace
- 60 Nm plus an additional 90° turn
- Transmission mount to transmission support
- Bolt
- Replace
- 40 Nm plus an additional 90° turn
- Transmission mount to chassis
- Transmission Mount
- Refer to TRANSMISSION MOUNT
- Bolt
- Replace
- 40 Nm plus an additional 90° turn
- Transmission support to transmission
- Bolt
- Replace
- 40 Nm plus an additional 90° turn
- Transmission support to transmission
- Final Drive Support
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.