HVAC System DTCS

2015 Acura RDX AWDSECTION HVAC System DTCS
HVAC SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) INDENTIFICATION

DTC Description
B1209 Climate Control Unit Lost Communication with MICU (FOB ID message) (2013-18)
B121A An Open in the Mode Control Motor Circuit (2013-15)
B121A An Open in the Mode Control Motor Circuit (2016-18)
B121B A Short in the Mode Control Motor Circuit (2013-15)
B121B A Short in the Mode Control Motor Circuit (2016-18)
B1220 A Short in the Recirculation Control Motor Circuit (2013-15)
B1220 A Short in the Recirculation Control Motor Circuit (2016-18)
B1225 An Open in the In-Car Temperature Sensor Circuit (2013-15)
B1225 An Open in the In-Car Temperature Sensor Circuit (2016-18)
B1226 A Short in the In-Car Temperature Sensor Circuit (2013-15)
B1226 A Short in the In-Car Temperature Sensor Circuit (2016-18)
B1227 An Open in the Outside Air Temperature Sensor Circuit (2013-15)
B1227 An Open in the Outside Air Temperature Sensor Circuit (2016-18)
B1228 A Short in the Outside Air Temperature Sensor Circuit (2013-15)
B1228 A Short in the Outside Air Temperature Sensor Circuit (2016-18)
B1229 An Open in the Sunlight Sensor Circuit (2013-15)
B1229 An Open in the Sunlight Sensor Circuit (2016-18)
B1230 A Short in the Sunlight Sensor Circuit (2013-15)
B1230 A Short in the Sunlight Sensor Circuit (2016-18)
B1231 An Open in the Evaporator Temperature Sensor Circuit (2013-15)
B1231 An Open in the Evaporator Temperature Sensor Circuit (2016-18)
B1232 A Short in the Evaporator Temperature Sensor Circuit (2013-15)
B1232 A Short in the Evaporator Temperature Sensor Circuit (2016-18)
B1233 An Open in the Air Mix Control Motor Circuit (Driver's) (2013-15)
B1233 An Open in the Air Mix Control Motor Circuit (Driver's) (2016-18)
B1234 A Short in the Air Mix Control Motor Circuit (Driver's) (2013-15)
B1234 A Short in the Air Mix Control Motor Circuit (Driver's) (2016-18)
B1235 A Problem in the Air Mix Control Motor Circuit, Linkage, Door, or Motor (Driver's) (2013-15)
B1235 A Problem in the Air Mix Control Motor Circuit, Linkage, Door, or Motor (Driver's) (2016-18)
B1236 An Open in the Passenger's Air Mix Control Motor Circuit (2013-15)
B1236 An Open in the Passenger's Air Mix Control Motor Circuit (2016-18)
B1237 A Short in the Passenger's Air Mix Control Motor Circuit (2013-15)
B1237 A Short in the Passenger's Air Mix Control Motor Circuit (2016-18)
B1238 A Problem in the Passenger's Air Mix Control Motor Circuit, Linkage, Door, or Motor (2013-15)
B1238 A Problem in the Passenger's Air Mix Control Motor Circuit, Linkage, Door, or Motor (2016-18)
B1240 A Problem in the Mode Control Motor Circuit, Linkage, Door, or Motor (2013-15)
B1240 A Problem in the Mode Control Motor Circuit, Linkage, Door, or Motor (2016-18)
B1241 A Problem in the Blower Motor Circuit (2013-15)
B1241 A Problem in the Blower Motor Circuit (2016-18)
B2983 A Problem in the Recirculation Control Motor Circuit, Linkage, Door, or Motor (2013-15)
B2983 A Problem in the Recirculation Control Motor Circuit, Linkage, Door, or Motor (2016-18)
B2986 An Open in the Recirculation Control Motor Circuit (2013-15)
B2986 An Open in the Recirculation Control Motor Circuit (2016-18)
U1280 Communication Bus Line Error (BUS-OFF) (Climate Control Unit) (2013-15)
U1280 Communication Bus Line Error (BUS-OFF) (Climate Control Unit) (2016-18)
U1281 Lost Communication with MICU (Climate Control Unit) (2016-18)
U128D Lost Communication with Gauge Control Module (Climate Control Unit) (2013-15)
U128D Lost Communication with Gauge Control Module (Climate Control Unit) (2016-18)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.