Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Lower Valve Body Assembly: Reassembly
2004 Acura 3.5RLSECTION Reassembly
- Coat all components with ATF. To reassemble, reverse disassembly procedure using NEW filters and NEW "O" rings.
- Ensure check balls are installed in proper areas of main valve body. Ensure all filters are installed in proper direction. See Figure.
- Ensure proper length bolts are installed in designated areas. See Fig 1. Tighten all bolts and flange nuts to specification. See TORQUE SPECIFICATIONS .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.