Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2003MDX TOURINGREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTAUDIO SYSTEMSYMPTOM TROUBLESHOOTING INDEX
2003 Acura MDX Touring
Symptom Troubleshooting Index
2003 Acura MDX TouringSECTION Symptom Troubleshooting Index
SYMPTOM TROUBLESHOOTING INDEX
| Symptom | Diagnostic procedure | Also check for |
|---|---|---|
| Poor AM/FM radio reception or interference | Symptom Troubleshooting (see SYMPTOM TROUBLESHOOTING ) |
|
| Power switch will not turn ON (No information display and no sound) | Symptom Troubleshooting (see POWER SWITCH WILL NOT TURN ON (NO INFORMATION DISPLAY AND NO SOUND) ) | |
| Power will not turn OFF | Symptom Troubleshooting (see POWER WILL NOT TURN OFF ) | |
| Radio preset memory is lost | Symptom Troubleshooting (see RADIO PRESET MEMORY IS LOST ) |
|
| XM radio preset memory is lost | Symptom Troubleshooting (see XM RADIO PRESET MEMORY IS LOST ) | |
| Audio system sound is weak or distorted, or no sound is heard from speakers (display is normal) | Symptom Troubleshooting (see AUDIO SYSTEM SOUND IS WEAK OR DISTORTED, OR NO SOUND IS HEARD FROM SPEAKERS (DISPLAY IS NORMAL) ) | |
| Poor or no sound with XM radio | Symptom Troubleshooting (see POOR OR NO SOUND WITH XM RADIO ) | |
| Audio unit button illumination does not work | Symptom Troubleshooting (see AUDIO UNIT BUTTON ILLUMINATION DOES NOT WORK ) | |
| Radio remote switch does not work properly | Symptom Troubleshooting (see RADIO REMOTE SWITCH DOES NOT WORK PROPERLY ) | |
| Audio disc does not load | Symptom Troubleshooting (see AUDIO DISC DOES NOT LOAD ) | |
| Audio disc does not play | Symptom Troubleshooting (see AUDIO DISC DOES NOT PLAY ) | |
| Audio disc skips | Symptom Troubleshooting (see AUDIO DISC SKIPS ) | Tire pressure (over inflated) |
| Audio disc does not eject | Symptom Troubleshooting (see AUDIO DISC DOES NOT EJECT ) | |
| Disc changer does not load all six discs | Symptom Troubleshooting (see DISC CHANGER DOES NOT LOAD ALL SIX DISCS ) | |
| Disc changer does not move between discs | Symptom Troubleshooting (see DISC CHANGER DOES NOT MOVE BETWEEN DISCS ) | |
| Volume does not change | Symptom Troubleshooting (see VOLUME DOES NOT CHANGE ) | |
| Radio tuner does not change stations | Symptom Troubleshooting (see RADIO TUNER DOES NOT CHANGE STATIONS ) | |
| XM radio display is blank and no station information is displayed | Symptom Troubleshooting (see XM RADIO DISPLAY IS BLANK AND NO STATION INFORMATION IS DISPLAYED ) |
|
| Radio displays error code: XM NO SIGNAL | Symptom Troubleshooting (see RADIO DISPLAYS ERROR CODE: XM NO SIGNAL ) | |
| Radio displays error code: XM ANTENNA | Symptom Troubleshooting (see RADIO DISPLAYS ERROR CODE: XM ANTENNA ) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.