⚙️Transmission Fluid

Subaru Forester 2.0XT Transmission Fluid

Factory transmission fluid type for the Subaru Forester 2.0XT.

Last updated: 2026-10-28 • Reading time: 8 min • By AllOEMManuals Editorial Team

Quick Answer

2015-2018 Subaru Forester 2.0XT: 13.10 QTS. (12.39 L) — SUBARU High Torque CVT Oil for Lineartronic.

GenerationYearsTop spec
2015-20182015-201813.10 QTS. (12.39 L) — SUBARU High Torque CVT Oil for Lineartronic

This vehicle's factory manual

The spec is above. This opens the 2015 Subaru Forester 2.0XT factory book. Use another year if yours is older.

Open the 2015 Subaru manual

Subaru Forester 2.0XT maintenance schedule

Factory Manual ConfirmationTransmission Fluid

Know the exact transmission fluid job for your Subaru Forester 2.0XT

2015-2018 Subaru Forester 2.0XT: 13.10 QTS. (12.39 L) — SUBARU High Torque CVT Oil for Lineartronic.

Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.

Exact Vehicle Check

The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.

Open the factory manual above to confirm the exact engine before ordering parts.

2015-2018

Automatic Transmission Fluid (2.0L Eng)13.10 QTS. (12.39 L) — SUBARU High Torque CVT Oil for Lineartronic
Manual Transmission Fluid3.50 QTS. (3.31 L) — SUBARU Extra MT Alternative: GL-5 SAE 75W-90
Notes
  • →Alternative oil will detract from drive ability and fuel efficiency.

Manual already checked Amazon for you

You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.

The Exact Part
Verified Fit

Subaru Forester 2.0XT Transmission Fluid

Wrong ATF destroys transmissions. Get the exact spec for your Subaru Forester 2.0XT.

We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.

Transmission Fluid — Manual's Parts List

Wrong fluid destroys transmissions. Get the exact spec.

Vehicle-Scoped Amazon Search

Opens Amazon with Subaru Forester 2.0XT prefilled so you can confirm fitment and avoid wrong parts.

Check Fitment on Amazon

Get everything at once

One search shows all of the above on a single page.

See All on Amazon

Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.

One-Trip Shopping List

Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.

Frequently Asked Questions

What transmission fluid does a Subaru Forester 2.0XT use?
2015-2018 Subaru Forester 2.0XT: 13.10 QTS. (12.39 L) — SUBARU High Torque CVT Oil for Lineartronic.
When should I change the transmission fluid in a Subaru Forester 2.0XT?
Factory service manuals typically recommend transmission fluid changes every 30,000–60,000 miles for automatics and 60,000–100,000 miles for manuals under normal use. Severe service intervals are shorter. Check your maintenance schedule for the exact mileage.

Get the Complete Maintenance Schedule for Subaru Forester 2.0XT

Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.

Not sure you want to DIY? Compare local shop pricing first.

Author & Review

Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.

Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.

Last updated: 2026-10-28

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required