DIY repair guide for 2008 Mitsubishi Eclipse
Engine air filter replacement Guide — 2008 Mitsubishi Eclipse
Start with the exact-fit quick answer below, then open the full guide when you want the longer procedure, parts, and factory references.
Related manual matches
Manual sections related to engine air filter replacement
These search matches may cover different variants or procedures. Open each section and confirm that it applies to your 2008 Mitsubishi Eclipse before using its specifications.
Related manual section
A L L Diagnostic Trouble Codes ( DTC )
Eclipse%20L4-2.4L%20%284G69%29A L L Diagnostic Trouble Codes ( DTC ) — 2008 Mitsubishi Eclipse L4-2.4L (4G69) Service Manual ~ LEMON Manuals LEMON Manuals: Repair Knowledge Reimagined Home >> Mitsubishi >> 2008 >> Eclipse L4-2.4L (4G69) >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) A L L Diagnostic Trouble...
Related manual section
A L L Diagnostic Trouble Codes ( DTC )
Eclipse%20V6-3.8L%20%286G75%29A L L Diagnostic Trouble Codes ( DTC ) — 2008 Mitsubishi Eclipse V6-3.8L (6G75) Service Manual ~ LEMON Manuals LEMON Manuals: Repair Knowledge Reimagined Home >> Mitsubishi >> 2008 >> Eclipse V6-3.8L (6G75) >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) A L L Diagnostic Trouble...
Related manual section
Application and ID
Eclipse%20L4-2.4L%20%284G69%29Repair and Diagnosis: Application and ID — 2008 Mitsubishi Eclipse L4-2.4L (4G69) Service Manual ~ LEMON Manuals LEMON Manuals: Repair Knowledge Reimagined Home >> Mitsubishi >> 2008 >> Eclipse L4-2.4L (4G69) >> Repair and Diagnosis >> Application and ID Repair and Diagnosis: Application and ID...
Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick answer
Filter jobs are won by size, access, and airflow direction
This page keeps the exact filter fitment, access path, and install direction close to the top so the job stays quick.
Direct answer
Confirm engine filter size and seal
2008 Mitsubishi Eclipse filter service is straightforward once you know the exact filter path and access point.
- • Filter part: Engine air filter
- • Confirm the filter size and airbox fitment before checkout.
- • Open the housing carefully so the seal closes properly on reinstall.
- • Use the performance-filter notes on the page if you are comparing reusable or higher-flow options.
Before you order
Use the exact vehicle path and replacement interval
The fitment and access notes already on this page are the ones to trust before you buy.
- • Keep the replacement interval and access notes visible while you compare listings.
- • Use the vehicle-specific manual path when the housing or glove-box access is tight.
- • Check the housing seals and do not over-oil a reusable filter.
Next step
Pair the filter page with the rest of the maintenance cluster
Filter pages work best when they stay linked to the rest of the maintenance stack owners often batch together.
- • Keep the vehicle hub open so the matching maintenance paths stay visible.
- • Open the oil page if you are batching a service reset or a wider maintenance visit.
This vehicle's factory manual
2008 Mitsubishi Eclipse: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Check the procedure for your vehicle
A year and model alone may not identify the correct repair. Match the engine, drivetrain and equipment to the service manual before using the overview below.
Match your vehicle
Check the VIN, engine and drivetrain against the manual. Different configurations can use different components and procedures.
Confirm the service details
Use the matching service procedure for access, fastener specifications and service sequence. General time and cost estimates do not establish applicability.
Manual and spec cross-checks
Use the linked manual and spec paths to verify fitment, torque, and service order before teardown.
Code reinforcement
Related Trouble Codes
These check engine light codes are often connected to this repair.
Fuel Code
P0110: Intake Air Temperature Sensor Circuit
Promote from symptom hubs and repair pages
Promote from symptom hubs and repair pages
Fuel Code
P0172: System Too Rich (Bank 1)
Promote from symptom hubs and repair pages
Promote from symptom hubs and repair pages
Fuel Code
P0175: System Too Rich (Bank 2)
Promote from symptom hubs and repair pages
Promote from symptom hubs and repair pages
Best first step for this repair
Search parts and confirm fitment
Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.
Amazon results open in a new tab so you can keep this repair flow visible.
Confirm engine, trim, and production split before checkout.
Use the warnings and torque notes below as your final pre-order check.
Need the walkthrough?
Open full repair guide
Load the interactive guide only when you want the expanded walkthrough, extra specs, and the vehicle health snapshot.
No signup required. Loads only when requested for a faster first page view.
Start here with the short guide, then open the full version if you need more detail.
At a glance
The core information most people want before deciding whether to do this repair themselves.
DIY parts cost: $15-40
Difficulty
Easy
Time
5-10 minutes
Parts
1 items
Compare costs
Get a vehicle-specific estimate
Safety Warnings
- •Do not over-oil if using reusable filter
- •Ensure housing seals properly
Tools required
Gather these before you start so the job flows cleanly once the vehicle is apart. Click any tool to shop it on Amazon.
Parts searches: confirm fitment
These links open search results, not a verified parts list. Confirm the part number, engine, trim, and production split before ordering.
We surface the most relevant part number, OEM reference, or spec we have for this job so you can compare listings with higher confidence.
Bundle everything
Shop the complete engine air filter replacement kit
Pads, rotors, hardware, fluids, and tools — one search for the whole job.
Fastest parts to verify before checkout
Use these quick searches when you want the main replacement item first and the support pieces second.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
What the Pros Prefer: 2008 Mitsubishi Eclipse Engine Air Filter Replacement
Professional 4-step job flow, tool sizes, and certified technician best practices.
Job Preparation & Access Clearance
Shop Tip:Clear dust and road grime from the working area before loosening hardware. Protect eyes and hands from fluids and sharp metal edges.
Fastener Extraction & Component Disassembly
Shop Tip:Apply penetrating spray to heat-cycled or rusted bolts 10 minutes prior to removal. Use 6-point sockets to avoid rounding off bolt heads.
Mating Surface Inspection & Cleaning
Shop Tip:Clean all mounting surfaces to bare metal. Verify that old gaskets, O-rings, and crush washers are fully removed before installing new parts.
Final Torque & Operational Verification
Shop Tip:Torque fasteners to factory OEM specifications in an alternating star or criss-cross pattern to ensure uniform clamping pressure.
Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases on tool links at no extra cost to you.
Basic procedure overview
This is the short version of the job flow. The AI guide below fills in torque specs, access details, and vehicle-specific cautions.
- 1Locate air filter box
- 2Release clips or screws
- 3Remove old filter
- 4Clean housing if dirty
- 5Install new filter
- 6Secure housing
Frequently asked questions
- How much does engine air filter replacement cost for a 2008 Mitsubishi Eclipse?
- The general parts estimate shown here is $15-40. It is not a quote for your 2008 Mitsubishi Eclipse's exact engine or configuration. Confirm the required parts and supplies in the matching manual, compare current prices, and get a written shop estimate that identifies the work and labor included.
- How long does engine air filter replacement take on a 2008 Mitsubishi Eclipse?
- A engine air filter replacement on a 2008 Mitsubishi Eclipse typically takes 5-10 minutes for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.
- Can I do engine air filter replacement myself on a 2008 Mitsubishi Eclipse?
- Yes, a engine air filter replacement on a 2008 Mitsubishi Eclipse is rated Easy and is a great beginner DIY project. You'll need basic hand tools and about 5-10 minutes.
- What tools do I need for engine air filter replacement on a 2008 Mitsubishi Eclipse?
- For engine air filter replacement on a 2008 Mitsubishi Eclipse you'll need: Screwdriver (possibly). You'll also need the correct replacement parts: Engine air filter.
- What happens if I delay engine air filter replacement on my 2008 Mitsubishi Eclipse?
- A dirty engine air filter in your 2008 Mitsubishi Eclipse restricts airflow to the engine, reducing power by up to 10% and hurting fuel economy. Over time it can allow debris into the engine.
Get the Full AI-Powered Repair Guide
Use the expanded guide alongside the service manual for your 2008 Mitsubishi Eclipse. Confirm specifications, parts and procedure for your engine before starting.
Unlimited AI repair guides for every vehicle. No signup required. Veteran-owned.